Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 11: GNSS instruments
Introduction: The ISO 17123 series specifies field procedures for adoption when determining and evaluating the uncertainty of measurement results obtained by geodetic instruments and their ancillary equipment, when used in building and surveying measuring tasks. Primarily, these tests are intended to be field verifications of suitability of a particular instrument for the immediate task. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposely designed to minimize atmospheric influences. ISO 17123-8[1] provides a standard which exclusively covers Global Navigation Satellite System (GNSS) test procedures for real-time kinematic applications. Since the creation of ISO 17123-8[1], GNSS-based geodetic measurement and instrumentation techniques have evolved in many ways: — in addition to the classical real-time kinematic measurement procedures on which ISO 17123-8[1] is based, other GNSS-based geodetic measurement procedures have become established; — complementary to classical base-rover measurement arrangements and the instrument morphology by means of separation of antenna and receiver, which was widely used at the time, versatile integrated measurement instrument types are currently available; — correction data services play an essential role in the analysis. This document therefore has the
Scope: This document specifies a field procedure for the verification that a given Global Navigation Satellite System (GNSS)-based system and measurement procedure meets a required measurement uncertainty at the location and time of interest. The field procedure uses three-dimensional coordinates which are compared to reference coordinates. It is designed to be applicable to the technically versatile geodetic and surveying GNSS systems on the market and can be used for any kind of GNSS-based applications to determine coordinates. It is independent of the technology used in the GNSS measuring instrument, the satellite data streams, and any correction data used. The procedure is applicable to GNSS instruments under operating condition in the field in such a way that the main parameters affecting the determination of coordinates are included in the result of the test. This document defines several delimitation criteria, which allows for versatile applicability. As a result, the verification procedure can be regularly performed in the field with limited economic impact.