ISO 17256-2024 PDF

ISO 17256-2024 PDF

Anaesthetic and respiratory equipment-Respiratory therapy tubing and connectors

$48.00 $96.00 -50%
Product Code: ISO 17256
Stock In Stock
Edition: 1.
Published: 07/2024
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Anaesthetic and respiratory equipment — Respiratory therapy tubing and connectors

Introduction: Respiratory tubing and connectors form the essential conduit between the patient interface and the gas supply device. The connectors specified in this document have been selected taking into consideration the risks of misconnection with other medical devices commonly used within the same environment. The requirements in this document were further developed and are to be circulated to all ISO/TC 121 subcommittees as recommendations. Respiratory tubing and connectors are used extensively in healthcare facilities and increasingly in the home healthcare environment where medically trained personnel are not always in attendance. These environments have been carefully considered throughout the development of this document. This document recognizes the significant use and the inherent safety of the EN 13544-2[1] specified nipple as the gas outlet on respiratory gas supply devices and therefore specifies a compatible elastomeric (funnel) connector as the inlet of the respiratory tubing. This document also recognizes the high risks associated with misconnection of the previously prescribed elastomeric (funnel) connector at the outlet (patient end) of the tubing and has therefore specified the new R2 respiratory small-bore connector as the outlet connector if the respiratory tubing is not integrated with the patient interface device (e.g. face mask, nasal cannula). The concept of extension tubing, commonly used to provide flexibility of movement for the patient in home- care environmen

Scope: This document specifies requirements for the respiratory tubing and connectors used to convey respirable gases to a patient in the healthcare and homecare environments and provide a safe connection between the gas supply device and the patient interface. Respiratory tubing and connectors are mainly used for delivery of oxygen but can also be used for respirable air or oxygen/air mixtures and breathable medicinal gas mixtures such as oxygen/nitrous oxide or oxygen/helium mixtures. This document also specifies requirements for respiratory therapy extension tubing. NOTE 1 The gas supply devices referred to in this document do not include anaesthetic machines/workstations and ventilators. NOTE 2 This document does not cover breathing tubes for breathing systems. These are specified in ISO 5367. This document is written following the format of ISO 18190, General standard for airways and related equipment. The requirements in this device-specific standard take precedence over any conflicting requirements in the General standard

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17256-2024 PDF

ISO 17256-2024 PDF

$48.00 $96.00