Petroleum products and other liquids - Ethanol - Determination of electrical conductivity
Introduction: Conductivity is related to the electrical current which is achieved by the ions displacement into solution in an electrical field. The importance of measuring conductivity is due to its role in corrosion processes which can harm metallic components and therefore cause bad engine functioning at long term. Ethanol can be contaminated with ion solutions in many ways, such as water contamination, chemical treatment in industrial processes, addition of chemical additives, incorrect transportation and storage, generally related to the cleanliness of tanks. The ascertainment of the conductivity is usually carried out through the measurement of the electrical conductance between two platinum electrodes, immersed in an electrolytic solution and connected to a source of alternating electromotive force of a typical frequency. The resulting current is directly proportional to the number of ions present in the solution, mobility and ionic valence, and temperature. In the measuring of the conductance, it is essential to use an alternating current in order to eliminate the undesirable effects of faradaic currents. In the case of an alternating resultant current, an inversion of the polarization occurs every half cycle and, consequently, the inversion of the flow of the migration of the ions, leading to a non-faradaic process, which comprises the formation of a double electrical layer in the electrode-solution interface, called double electrical layer, with the potential decreasing linearly
Scope: This International Standard specifies a test method for the determination of the electrical conductivity in ethanol fuel and mixtures (including E85) in the range of 0,5 μS·cm−1 to 4 μS·cm−1 at a temperature of 25 °C. The electrical conductivity is determined from the measured electrical conductance.