Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO2 at high pressures
Introduction: In recent years, the oil industry has been facing challenges in developing and operating high-CO2 content offshore fields. The CO2-rich streams, separated from the produced natural gas, can be injected to enhance oil recovery from the reservoirs. Even in cases where the oil recovery increase is not so significant, operators have to consider the CO2-rich stream compression and injection, in order to avoid its venting to the atmosphere. Main concerns comprise surface safety system and material selection areas, which lack specific standards and regulations for this scenario. The commercial tools available, for instance, to model the dispersion of gases, need to be validated for CO2 and CO2/hydrocarbon mixtures, which have distinctive thermodynamic behaviour. This will affect the choice of materials and plant design. This International Standard addresses concepts and criteria for processing CO2-rich streams, as a supplement to existing standards for offshore installations. vi © ISO 2016 – All rights reserved
Scope: This International Standard contains provisions for design of topside facilities for offshore plants handling CO2-rich streams at high pressures; i.e. CO2 molar concentration above 10 %. The surface systems include usual offshore process unit operations, as shown in Figure 1. This International Standard is applicable only to topside facilities of fixed and floating oil and gas production offshore units up to the last barrier, such as an ESDV. Subsea production systems and Cryogenic CO2 separation are not covered. NOTE This example is within the scope of this International Standard. Figure 1 — Example of a Process Flow Diagram (in grey zone)