Packaging — Transport packaging for dangerous goods — Compatibility testing of polyethylene, fluorinated polyethylene and co-extruded plastic
Introduction: This document was developed to provide requirements and test procedures which are aligned with the United Nations Recommendations on the Transport of Dangerous Goods — Model Regulations[1], referred to as “UN Recommendations” throughout this document. This document can be used in the evaluation of the chemical compatibility of packaging and intermediate bulk containers (IBC) made from plastics material, with multilayer structures. This document provides a test method for the compatibility testing of packaging/ IBC made of polyethylene, fluorinated polyethylene and co-extruded plastics. According to paragraphs 6.1.5.2.4 and 6.5.6.3 of the UN Recommendations,[1] the chemical compatibility for packaging and IBC made from plastics material is required for packaging of dangerous goods. Plastics packaging/IBC material can be attacked by the chemical contents in the package. Such effects are caused by different mechanisms such as environmental stress cracking (ESC), chemical degradation or swelling or a combination of this. The UN Recommendations and the associated modal regulations require that all packaging/IBCs be assessed for compatibility with the substances which they are to contain. The UN text makes special reference to plastics packaging/IBCs for liquids. The procedure therein contains details of testing for six months at ambient temperature with the liquid to be carried. According 6.1.5.2.4 or 6.5.6.3 of the UN Recommendations, the compatibility can be verified using other
Scope: This document specifies test methods for the determination of the chemical compatibility of packaging/ IBC made from polyethylene (PE), fluorinated polyethylene and co-extruded plastics. It covers the determination of adequate plastics compatibility against the following processes of deterioration: — softening due to absorption (swelling); — stress cracking; — combinations thereof. This document is applicable to: — drums and jerricans made from plastics; — composite packaging (plastics) with inner receptacle made from plastics; — rigid plastics IBCs (types 31H1 and 31H2); — composite IBCs with rigid plastics inner receptacles (type 31HZ1); used for the transport of liquid dangerous goods. Proof of adequate plastics compatibility obtained using the test procedures specified in this document is only applicable to the above packaging and IBC types of the following materials and material specifications: — packaging and IBCs made from PE; — packaging and IBCs made from PE, whose internal surfaces are fluorinated; and — packaging and IBCs which are coextrusion blow moulded and have walls with the following multilayer structure (from inside to outside): — polyamide (PA), bonding agents, PE, or — ethylene vinyl alcohol (EVOH), bonding agents, PE. Note Packaging and IBCs made from PE and packaging and IBCs made from PE with fluorinated internal surfaces, deteriorate additionally due to molecular degradation reactions with the corresponding packaged substances. For this, the chemical compatibility can also be verified by the type tests described in ISO 13274:2013, Annex B, B.2.3, using the standard liquid nitric acid (55 %) or appropriate original packaged substances. Packaging made from Coex PE/PA and Coex PE/EVOH is not resistant to polar acid molecularly degrading substances such as nitric acid, with the result that a corresponding method is not considered for this process of deterioration in this document.