Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance
Introduction: Noise calculation methods are a mathematical description on how to determine noise levels at receivers from the emission data of sources and from data describing the acoustically relevant environment along the propagation paths. In some cases, they include the determination of the sound emission from the technical parameters of the sources. Even if knowledge about the physics of sound propagation grows continuously driven by research and experience, the standardized calculation methods are adapted to this increasing state of the art stepwise and remain constant some years for reasons of planning stability. If obviously relevant influences on sound emission and sound propagation cannot, with sufficient accuracy, be derived from physical models with existing knowledge, empirically constructed mathematical formulations are often applied as a time-limited agreement. Such a compromise between experts needs careful consideration of pros and cons and is generally derived and periodically reconsidered by standardization or similar groups. In some cases, software programs are designed and developed to apply a certain documented method. Software products with more than one alternatively selectable calculation method implemented are software platforms, often organizing many other important jobs and operations like the user interfacing, the data input and output facilities, the tools to inspect and modify the input data, and last but not least, the tools to present and analyse the result
Scope: ISO 17534-1 describes quality requirements and measures to ensure, to indicate, and to verify the degree of conformity of a software program with a consistently implementable calculation method/procedure. The main objective of ISO 17534-1 is to ensure that applying a consistent implementable calculation method with different quality assured software products on an identical set of input data will produce the same results within a defined range of acceptable deviations. ISO 17534-1 enables the producer of this type of software to declare and to proof the correct implementation of a calculation method and the software user to verify it without the necessity of a third-party certification. It takes into account that software developers and software users are members of the same scientific-technical community and offers means and measures for a transparent and open communication between them. ISO 17534-1 does not cover the aspect of correctness of the calculation method itself, i.e. especially the agreement of calculated results with results obtained with measurements will not be touched. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 accuracy agreement of results calculated with a software with those obtained by strict obedience of the method according to its official documentation 2.2 beta version version of the software not yet ready for release but sent to a selected group of users for testing and comment 2.3 calculation method complete set of algorithms, simulations, and other routines necessary to determine a result in accordance with the scope of the method on the basis of a complete set of input data Note 1 to entry: A set of input data that quantifies and describes the noise sources output and position, the geometric and acoustic properties of the environment that influence sound propagation, and the positions of the receivers. Note 2 to entry: For the purpose of ISO 17534-1, “calculation”, “prediction”, or “computation” has the same meaning. 2.4 calculation ray polygon line representing a propagation path from a point source to a receiver taken into account to calculate the corresponding sound cont