ISO 17772-1-2017 PDF

ISO 17772-1-2017 PDF

Energy performance of buildings - Indoor environmental quality - Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings

$145.50 $291.00 -50%
Product Code: ISO 17772-1
Stock In Stock
Edition: 1ST
Published: 06/2017
Number of Pages: 70
File Size: 1 file, 5 Bytes

Available Options

Product Description

Energy performance of buildings - Indoor environmental quality - Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings

Introduction: Energy consumption of buildings depends significantly on the criteria used for the indoor environment (heating, cooling, ventilation and lighting) and building (including systems) design and operation. Indoor environment also affects health, productivity and comfort of the occupants. Recent studies have shown that costs of poor indoor environment for the employer, the building owner and for society, as a whole are often considerable higher than the cost of the energy used in the same building. It has also been shown that good indoor environmental quality can improve overall work and learning performance and reduce absenteeism. In addition uncomfortable occupants are likely to take actions to make themselves comfortable which may have energy implications. There is therefore a need for specifying criteria for the indoor environment for design and energy calculations for buildings and building service systems. There exist other national and International Standards, and technical reports, which specify criteria for thermal comfort (ISO 7730[2]). These documents do specify different types and categories of criteria, which may have a significant influence on the energy demand. For the thermal environment criteria for the heating season (cold/winter) and cooling season (warm/summer) are listed. These criteria are, however, mainly for dimensioning of building, heating, cooling and ventilation systems. They may not be used directly for energy calculations and year-round evaluation of

Scope: This document specifies requirements for indoor environmental parameters for thermal environment, indoor air quality, lighting and acoustics and specifies how to establish these parameters for building system design and energy performance calculations. It includes design criteria for the local thermal discomfort factors, draught, radiant temperature asymmetry, vertical air temperature differences and floor surface temperature. This document is applicable where the criteria for indoor environment are set by human occupancy and where the production or process does not have a major impact on indoor environment. It also specifies occupancy schedules to be used in standard energy calculations and how different categories of criteria for the indoor environment can be used. The criteria in this document can also be used in national calculation methods. This document sets criteria for the indoor environment based on existing standards and reports (listed in Clause 2 and the Bibliography). The document does not specify design methods, but gives input parameters to the design of building envelope, heating, cooling, ventilation and lighting.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17772-1-2017 PDF

ISO 17772-1-2017 PDF

$145.50 $291.00