ISO 17804-2020 PDF

ISO 17804-2020 PDF

Founding-Ausferritic spheroidal graphite cast irons-Classification

$113.50 $227.00 -50%
Product Code: ISO 17804
Stock In Stock
Edition: 2ND
Published: 06/2020
Number of Pages: 42
File Size: 1 file, 2 Bytes

Available Options

Product Description

Founding — Ausferritic spheroidal graphite cast irons — Classification

Introduction: Ausferritic spheroidal graphite cast iron is a cast alloy, iron, carbon and silicon based, carbon primarily in the form of spheroidal graphite particles. Compared to the spheroidal graphite cast iron grades (see ISO 1083[3]), four material grades combine high strength, ductility and toughness properties while two grades combine higher strength with wear resistance as a result of ausferrite matrix structures. This document deals with the classification of ausferritic spheroidal graphite cast irons in accordance with the mechanical properties of the material. The mechanical properties of these ausferritic spheroidal graphite cast irons depend on their structure, e.g. the form of the graphite and the structure of the matrix. The required structure is developed by selecting the appropriate composition and subsequent processing. The mechanical properties of the material can be evaluated on machined test pieces prepared from: — separately cast samples with an appropriate gating system, able to provide metallurgical conditions similar to those of the castings they represent; — samples cast in the mould alongside the casting, with a joint running system, hereafter called “side- by-side cast samples”; — samples cast onto either the casting or the running system, hereafter referred to as “cast-on samples”; — samples cut from a casting (only by agreement between the manufacturer and the purchaser, the agreement specifying, in particular, the conditions of sampling and the values to be o

Scope: This document defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons. This document specifies five grades of ausferritic spheroidal graphite cast iron by a classification based on mechanical properties determined on machined test pieces prepared from: — separately cast samples, side-by-side cast or cast-on samples; — samples cut from a casting. This document also specifies two grades by a classification as a function of hardness.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17804-2020 PDF

ISO 17804-2020 PDF

$113.50 $227.00