ISO 17838-1-2026 PDF

ISO 17838-1-2026 PDF

Reactor technology-Design and performance evaluation of the emergency core cooling system strainer in pressurized water reactor nuclear power plants-Part 1: General principles

$71.50 $143.00 -50%
Product Code: ISO 17838-1
Stock In Stock
Edition: 1.
Published: 09/2026
Number of Pages: 24
File Size: 1 file, 1.2 MB

Available Options

Product Description

Reactor technology — Design and performance evaluation of the emergency core cooling system strainer in pressurized water reactor nuclear power plants — Part 1: General principles

Introduction: The purpose of this document is to provide guidance for the design and performance evaluation of the emergency core cooling system (ECCS) strainer(s) in pressurized water reactor (PWR) nuclear power plants (NPPs). While there are many types of PWRs (including existing and under-construction units), this document will focus on those that rely on ECCS pumps, which present enough similarities to allow a common approach. For other technologies, this document may be used selectively, depending on the specific design characteristics of their plants. In the event of a relevant line break within the containment of a PWR, control or management of the accident relies on cooling such as emergency core cooling system (ECCS), or containment cooling, via containment heat removal system (CHRS), exemplified by the containment spray system (CSS), or reactor vessel cavity cooling via cavity injection system (CIS), or core melt cooling via the core catcher or other features. All the above-mentioned cooling functions need to be achieved by water supplies, pumps, and filtration equipment to ensure the effectiveness of cooling water. The water can be obtained from locations such as the containment sump at the lower part of the containment or the in-containment refuelling water storage tank (IRWST). The functional requirements for the various components within these systems are derived from their safety claims. DBA, DBE and DEC are typically initiated by a relevant line break. Moreover, in the even

Scope: This document specifies the requirements for the design and performance evaluation of the ECCS strainer, since the performance of the strainer is important for the maintenance of nuclear safety during DBA, DBE and DEC. This document is applicable to the design and performance evaluation of the ECCS strainer in PWR NPPs, particularly those with primary design philosophies that rely on ECCS pumps. Its relevance for some PWR designs could nevertheless need some adaptations. Moreover, although tailored to PWR NPPs, it can also serve as a valuable reference for other reactor types, providing insight into the design and effectiveness of filtration systems in various nuclear power applications. Additional information and insights on national practice can be found in References [1][2][3][4].

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17838-1-2026 PDF

ISO 17838-1-2026 PDF

$71.50 $143.00