ISO 17943-2016 PDF

ISO 17943-2016 PDF

Water quality - Determination of volatile organic compounds in water - Method using headspace solidphase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)

$129.00 $258.00 -50%
Product Code: ISO 17943
Stock In Stock
Edition: 1ST
Published: 04/01/2016
Number of Pages: 50
File Size: 1 file, 1 Byte

Available Options

Product Description

Water quality - Determination of volatile organic compounds in water - Method using headspace solidphase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)

Introduction: Volatile organic compounds (VOCs) are often found in the manufacturing processes of paints, adhesives, petroleum products, pharmaceuticals, and refrigerants. Some are used as gasoline additives, solvents, hydraulic fluids, and dry-cleaning agents. This group of compounds belongs to the group of anthropogenic chemicals. VOC contamination of water resources is a human-health concern because many are toxic and are known or suspected human carcinogens. For the determination of VOCs, several published procedures are available (see References [4],[5],[6],[7],[9],[12],[13], and [14]). © ISO 2016 – All rights reserved

Scope: This International Standard specifies a method for the determination of volatile organic compounds (see Table 1). This comprises, for example, halogenated hydrocarbons, trihalogenated methanes, gasoline components (such as BTEX, MTBE, and ETBE), naphthalene, 2-ethyl-4-methyl-1,3-dioxolane, and highly odorous substances like geosmin and 2-methylisoborneol in drinking water, ground water, surface water, and treated waste water, by means of headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS). The limit of determination depends on the matrix, on the specific compound to be analysed, and on the sensitivity of the mass spectrometer. For most compounds to which this International Standard applies, it is at least 0,01 µg/l. Validation data related to a concentration range between 0,02 µg/l and 2,6 µg/l have been demonstrated in an interlaboratory trial. Additional validation data derived from standardization work show applicability of the method within a concentration range from 0,01 µg/l to 100 µg/l of individual substances. All determinations are performed on small sample amounts (e.g. sample volumes of 10 ml). This method may be applicable to other compounds not explicitly covered by this International Standard or to other types of water. However, it is necessary to demonstrate the applicability for each case. Table 1 — Volatile organic compounds determinable by this method Name Molecular formula CAS registry no.d Molar mass g/mol Density kg/l tert-amyl methyl ether (TAME) C6H14O 994–05–8 102,17 0,76 benzene C6H6 71–43–2 78,12 0,88 bromobenzene C6H5Br 108–86–1 157,01 1,50 bromochloromethane CH2BrCl 74–97–5 129,38 1,99 bromodichloromethane CHBrCl2 75–27–4 163,83 1,98 n‐butylbenzene C10H14 104–51–8 134,22 0,86 sec‐butylbenzene C10H14 135–98–8 134,22 0,86 tert‐butylbenzene C10H14 98–06–6 134,22 0,87 chlorobenzene C6H5Cl 108–90–7 112,56 1,11 Signals of substances may overlap in chromatograms as they might co-elute. Density of liquid at boiling point (−13,4 °C) Refer to Tables F.1 and F.2 for validation data and additional information. CAS: Chemical Abstracts Service. INTERNATIONAL STANDARD ISO 17943:2016(E) © ISO 201

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17943-2016 PDF

ISO 17943-2016 PDF

$129.00 $258.00