ISO 17987-7-2025 PDF

ISO 17987-7-2025 PDF

Road vehicles-Local Interconnect Network (LIN)-Part 7: Electrical physical layer (EPL) conformance test specification

$162.00 $324.00 -50%
Product Code: ISO 17987-7
Stock In Stock
Edition: 2.
Published: 05/2025
Number of Pages: 204
File Size: 1 file, 25 Bytes

Available Options

Product Description

Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical physical layer (EPL) conformance test specification

Introduction: The LIN protocol as proposed is an automotive focused low-speed universal asynchronous receiver transmitter (UART)-based network. Some of the key characteristics of the Local Interconnect Network (LIN) protocol are signal-based communication, schedule table-based frame transfer, commander/responder communication with error detection, node configuration and diagnostic service transportation. The LIN protocol is for low-cost automotive control applications as, for example, door module and air condition systems. It serves as a communication infrastructure for low-speed control applications in vehicles by providing — signal-based communication to exchange information between applications in different nodes, — bitrate support from 1 kbit/s to 20 kbit/s, — deterministic schedule table-based frame communication, — network management that wakes up and puts the LIN cluster into sleep mode in a controlled manner, — status management that provides error handling and error signalling, — transport layer that allows large amount of data to be transported (such as diagnostic services), — specification of how to handle diagnostic services, — electrical physical layer specifications, — node description language describing properties of responder nodes, — network description file describing behaviour of communication, and — application programming interface. The ISO 17987 series is based on the open systems interconnection (OSI) basic reference model as specified in ISO/IEC 7498–1 which struct

Scope: This document specifies the conformance test for the electrical physical layer (EPL) of the LIN communications system. The purpose of this document is to provide a standardised way to verify whether a LIN bus driver conforms to ISO 17987-4. The primary motivation is to ensure a level of interoperability of LIN bus drivers from different sources in a system environment. This document provides all the necessary technical information to ensure that test results are consistent even on different test systems, provided that the particular test suite and the test system are conformant to the content of this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17987-7-2025 PDF

ISO 17987-7-2025 PDF

$162.00 $324.00