Reactor technology — Power reactor analysis — Steady-state neutronics methods
Introduction: The design and operation of nuclear reactors require knowledge of the conditions under which a reactor will be critical, as well as the degree of subcriticality or supercriticality when these conditions change. In addition, knowledge is required of the spatial distribution of neutron reaction rates in reactor components as a prerequisite, for example, for inferring proper power and temperature distributions to ensure the satisfaction of thermal-limit and safety-limit requirements. Both reaction-rate spatial distributions and reactivity have been measured by suitable experimental techniques, either in mock-ups or in the operating reactors themselves. These quantities can also be calculated by various techniques. Available reactor experimental data have been used to validate the steady-state neutronic calculations within reasonable margins. As more accurate nuclear cross sections and improved calculation methods have become available, steady-state neutronic calculations have been utilized extensively for nuclear fuel and core designs and analyses and thus have become increasingly important. © ISO 2026 – All rights reserved
Scope: This document provides guidance for performing and validating the sequence of steady-state calculations leading to prediction in all types of operating commercial nuclear reactors, of the following: — reaction-rate spatial distributions; — reactivity; — change of nuclide compositions with time. The document provides a) guidance for the selection of computational methods, b) criteria for verification and validation of calculation methods used by reactor core analysts, c) criteria for evaluation of accuracy and range of applicability of data and methods, and d) requirements for documentation of the preceding.