Essential technical requirements for mechanical components and metallic structures foreseen for Generation IV nuclear reactors
Introduction: GEN IV reactors’ objectives are to meet reinforced requirements (compared to GEN II to III reactors) concerning safety and reliability and linked with design and fabrication of equipment: — to excel in safety and reliability; — to eliminate the need for offsite emergency response; — to have a very low likelihood and degree of reactor core damage. This is supported with the use of codes or standards with a proven history of supporting public safety. The purpose of this document is not to replace these codes or standards but to identify the essential technical requirements which need to be addressed by the design and fabrication codes in order to allow to meet such safety requirements at the expected level for the GEN IV reactors. It enables these standards to co-exist, providing an approach that can accommodate technical innovations, existing national frameworks and market needs. vi © ISO 2018 – All rights reserved
Scope: This document defines the essential technical requirements that are addressed in the process of design and construction of Generation IV (GEN IV) nuclear reactors. It does not address operation, maintenance and in-service inspection of reactors. Six reactor concepts are considered for GEN IV: the sodium fast reactor, the lead fast reactor, the gas fast reactor, the very high temperature reactor, the supercritical water reactor and the molten salt reactor. Annex A details the main characteristics for the different concepts. The scope of application of this document is limited to mechanical components related to nuclear safety and to the prevention of the release of radioactive materials — that are considered to be important in terms of nuclear safety and operability, — that play a role in ensuring leaktightness, partitioning, guiding, securing and supporting, and — that contain and/or are in contact with fluids (such as vessels, pumps, valves, pipes, bellows, box structures, heat exchangers, handling and driving mechanisms).