ISO 18249-2015 PDF

ISO 18249-2015 PDF

Non-destructive testing - Acoustic emission testing - Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers

$96.50 $193.00 -50%
Product Code: ISO 18249
Stock In Stock
Edition: 1ST
Published: 05/01/2015
Number of Pages: 28
File Size: 1 file, 711 Bytes

Available Options

Product Description

Non-destructive testing - Acoustic emission testing - Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers

Introduction: The increasing use of fibre-reinforced polymer (FRP) materials in structural (e.g. aerospace, automotive, civil engineering) and infrastructural applications (e.g. gas cylinders, storage tanks, pipelines) requires respective developments in the field of non-destructive testing. Because of its sensitivity to the typical damage mechanisms in FRP, acoustic emission testing (AT) is uniquely suited as a test method for this class of materials. It is already being used for load test monitoring (increasing test safety) and for proof-testing, periodic testing and periodic or continuous, real-time monitoring (health monitoring) of pressure vessels, storage tanks, and other safety-relevant FRP structures. Acoustic emission testing shows potential where established non-destructive test methods (e.g. ultrasonic testing or water-jacket tests) are not applicable (e.g. thick carbon-fibre reinforced gas cylinders used for the storage and transport of compressed natural gas (CNG), gaseous hydrogen). The general principles outlined in EN 13554 apply to all classes of materials but this International Standard emphasizes applications to metallic components (see EN 13554:2011, Clause 6). However, the properties of FRP relevant to AT testing are distinctly different from those of metals. FRP structures are inherently non-homogeneous and show a certain degree of anisotropic behaviour, depending on fibre orientation and stacking sequence of plies, respectively. Material composition and properties, a

Scope: This International Standard describes the general principles of acoustic emission testing (AT) of materials, components, and structures made of fibre-reinforced polymers (FRP) with the aim of — materials characterization, — proof testing and manufacturing quality control, — retesting and in-service testing, and — health monitoring. This International Standard has been designed to describe specific methodology to assess the integrity of fibre-reinforced polymers (FRP), components, or structures or to identify critical zones of high damage accumulation or damage growth under load (e.g. suitable instrumentation, typical sensor arrangements, and location procedures). It also describes available, generally applicable evaluation criteria for AT of FRP and outlines procedures for establishing such evaluation criteria in case they are lacking. This International Standard also presents formats for the presentation of acoustic emission test data that allows the application of qualitative evaluation criteria, both online during testing and by post-test analysis, and that simplify comparison of acoustic emission test results obtained from different test sites and organizations. NOTE The structural significance of the acoustic emission cannot in all cases definitely be assessed based on AT evaluation criteria only but can require further testing and assessment (e.g. with other non-destructive test methods or fracture mechanics calculations).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18249-2015 PDF

ISO 18249-2015 PDF

$96.50 $193.00