ISO 18319-1-2026 PDF

ISO 18319-1-2026 PDF

Fibre-reinforced polymer (FRP) reinforcement for concrete structures-Part 1: Specifications of FRP sheets

$31.50 $63.00 -50%
Product Code: ISO 18319-1
Stock In Stock
Edition: 2.
Published: 01/2026
Number of Pages: 14
File Size: 1 file, 370 KB

Available Options

Product Description

Fibre-reinforced polymer (FRP) reinforcement for concrete structures — Part 1: Specifications of FRP sheets

Introduction: Fibre-reinforced polymer (FRP) sheets have been widely used for repairing and reinforcing existing concrete structures because of their lightweight and high tensile strength. On the other hand, the sheets are also brittle materials that break when they reach tensile strength. Their thickness is approximately 1 mm or less, which is extremely thin compared to the thickness of structural members. Therefore, FRP sheets are likely to cause stress concentration at convex or cracked areas on the concrete surface, so great care must be taken in design and construction. Additionally, since FRP sheets have many different types and mechanical properties, suppliers need to clearly state their specifications so that users can appropriately and safely select their FRP sheets. This standard specifies tensile strength, elastic modulus, ultimate strain, length, width, and thickness as information provided by material suppliers to users and specifies evaluation methods. For tensile strength, the guaranteed value with 99,9 % reliability (subtracting three times the standard deviation from the mean strength) and the average value and standard deviation are specified because tensile strength of brittle FRP materials is significant factor to determine material fracture. The strength used in an appropriate design code according to ISO 14484 is based on the value provided by the material supplier. © ISO 2026 – All rights reserved

Scope: This document specifies requirements for fibre-reinforced polymer (FRP) sheets for upgrading of concrete members for material suppliers. The methodologies to express the mechanical properties as characteristic values, appearance and dimensions, and sampling test are specified in this document. The fibre orientation of the FRP sheets covered by this document is unidirectional.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18319-1-2026 PDF

ISO 18319-1-2026 PDF

$31.50 $63.00