Textiles — Quantitative chemical analysis — Part 1: General principles of testing
Introduction: Methods for the quantitative analysis of fibre mixtures are based on two main processes, the manual separation and the chemical separation of fibres. It is preferable to use the method of manual separation, which is given in Annex B, whenever possible since it generally gives more accurate results than the chemical method. It can be used for all textiles whose component fibres do not form an intimate mixture, for example in the case of yarns composed of several elements each of which is made up of only one type of fibre, or woven fabrics in which the fibre of the warp is of a different kind to that of the weft, or knitted fabrics capable of being unravelled made up of yarns of different types. In general, the methods described in the different parts of ISO 1833 are based on the selective dissolution of an individual component. After the removal of a component, the insoluble residue is weighed, and the proportion of soluble component is calculated from the loss in mass. This document gives the information which is common to the analyses, by this method, of all fibre mixtures, whatever their composition. This information is intended to be used in conjunction with the other parts of ISO 1833; these parts contain the detailed procedures applicable to particular fibre mixtures. Where, occasionally, an analysis is based on a principle other than selective dissolution, full details are given in the appropriate part. Mixtures of fibres obtained during processing and, to a lesser exte
Scope: This document specifies a common method for the quantitative chemical analysis of various mixtures of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the scope of the appropriate part.