ISO 18335-2024 PDF

ISO 18335-2024 PDF

Petroleum products and related products-Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density-Method by constant pressure viscometer

$31.50 $63.00 -50%
Product Code: ISO 18335
Stock In Stock
Edition: 1.
Published: 01/2024
Number of Pages: 14
File Size: 1 file, 1 Byte

Available Options

Product Description

Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer

Introduction: The purpose of this document is to specify a procedure for measuring dynamic viscosity and density, and then calculating kinematic viscosity from these measurements, when applied to petroleum and related liquids. Kinematic viscosity is often a characteristic that is specified in product specifications and is a frequent measurement in testing laboratories. The constant pressure viscometer provides a versatile and efficient technique using less time and labour for the laboratory. © ISO 2024 – All rights reserved

Scope: This document specifies a procedure for determining dynamic viscosity, η, and density, ρ, for the calculation of kinematic viscosity, ν, of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures thereof, up to 60 % with middle distillate fuels, and lubricating oils (e.g. base oils, formulated oils), and synthetics, using a constant pressure viscometer. The range of kinematic viscosities covered in this test method is from 0,5 mm2/s to 2 000 mm2/s, with precision at 40 °C from 1,0 mm2/s to 1 286 mm2/s, and precision at 100 °C from 3,0 mm2/s to 157 mm2/s. The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). However, if the viscosity changes significantly with the shear rate, comparison with other measuring methods is only permissible at similar shear rates.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18335-2024 PDF

ISO 18335-2024 PDF

$31.50 $63.00