ISO 18375-2016 PDF

ISO 18375-2016 PDF

Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell test

$71.50 $143.00 -50%
Product Code: ISO 18375
Stock In Stock
Edition: 1ST
Published: 11/15/2016
Number of Pages: 20
File Size: 1 file, 745 Bytes

Available Options

Product Description

Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell test

Introduction: The main purpose of this International Standard is to provide repeatable and discriminatory test results. The dynamic behaviour of a road vehicle is a very important aspect of active vehicle safety. Any given vehicle, together with its driver and the prevailing environment, constitutes a closed-loop system that is unique. The task of evaluating the dynamic behaviour is, therefore, very difficult since the significant interaction of these driver vehicle-environment elements are each complex in themselves. A complete and accurate description of the behaviour of the road vehicle requires information obtained from a number of different tests. Since this test method quantifies only one small part of the complete vehicle handling characteristics, the results of these tests can only be considered significant for a correspondingly small part of the overall dynamic behaviour. Moreover, insufficient knowledge is available concerning the relationship between overall vehicle dynamic properties and accident avoidance. A substantial amount of work is necessary to acquire sufficient and reliable data on the correlation between accident avoidance and vehicle dynamic properties in general and the results of these tests in particular. Consequently, any application of this test method for regulation purposes will require proven correlation between test results and accident statistics. © ISO 2016 – All rights reserved

Scope: This International Standard describes an open-loop test method for determining the yaw stability of a vehicle on a low friction road surface. It applies to heavy vehicles, that is commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 (trucks and trailers with maximum weight above 3,5 tonnes and buses and articulated buses with maximum weight above 5 tonnes, according to ECE and EC vehicle classification, categories M3, N2, N3, O3 and O4). The method is intended for vehicles equipped with electronic yaw-stability control systems. As the results of this test depend largely on local and temporary changes in road surface friction, this International Standard gives recommendations about keeping the friction level as uniform as possible for good reproducibility of the test results.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18375-2016 PDF

ISO 18375-2016 PDF

$71.50 $143.00