ISO 18400-103-2017 PDF

ISO 18400-103-2017 PDF

Soil quality - Sampling - Part 103: Safety

$113.50 $227.00 -50%
Product Code: ISO 18400-103
Stock In Stock
Edition: 1ST
Published: 01/2017
Number of Pages: 40
File Size: 1 file, 1 Byte

Available Options

Product Description

Soil quality - Sampling - Part 103: Safety

Introduction: This document is one of a group of International Standards intended to be used in conjunction with each other where necessary (the role/position of the International Standards within the total Investigation programme is shown in Figure 1). It deals with safety during sampling and other soil investigation activities. International and national regulations regarding health and safety at work and associated guidance produced by statutory bodies and trade associations could exist and may need to be taken into account. It does not seek to address everyday hazards that could arise from the use of such items as sharp instruments, digging/drilling equipment, nor the hazards of driving to a site location. It is assumed that such hazards are satisfactorily dealt with by the personnel carrying out the investigation and the sampling. Former production sites for munitions and other warfare agents present special problems to investigators and others involved in handling samples collected at such locations. The guidance given in this document will be of assistance in these situations, but additional guidance about the precautions to be taken should be obtained from specialists, such as those responsible for the former operation of these sites. Geological and geotechnical investigations are outside of the scope of this document and for detailed guidance, reference is to be made to other relevant International Standards. However, soil quality investigations may sometimes be combined with geot

Scope: This document gives guidelines for: — identification of hazards that could be encountered during a site investigation and when collecting samples of soil and other ground material, including hazards that are intrinsic in the sampling operation (e.g. physical hazards) in addition to the hazards that might arise, e.g. from contamination with chemicals or biological agents; — measures to be adopted to control risks once an appropriate risk assessment has been carried out.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18400-103-2017 PDF

ISO 18400-103-2017 PDF

$113.50 $227.00