ISO 18406-2017 PDF

ISO 18406-2017 PDF

Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving

$113.50 $227.00 -50%
Product Code: ISO 18406
Stock In Stock
Edition: 1ST
Published: 04/2017
Number of Pages: 40
File Size: 1 file, 1 Byte

Available Options

Product Description

Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving

Introduction: This document was written to provide a standardized measurement method for the measurement of the radiated underwater sound during percussive pile driving. Sound is often an unintended by-product of man-made activities, and the increasing number of sound- producing human activities in oceans, seas, lakes, rivers and harbours have led to concern over noise pollution from unwanted sound and its potential effect on aquatic life. In some countries, there is already incipient regulation with regard to the impact of the radiated underwater sound, requiring acoustic monitoring for environmental impact assessment during construction projects. Percussive pile driving can be a significant source of low-frequency impulsive underwater sound. During the process, a pile is driven into the seabed (or river-bed, etc.) using a hammer, which is typically driven hydraulically. Such a technique is commonly used to position piles in shallow water construction applications. Examples of such applications include the following: — construction of offshore wind farms; — construction and mooring of platforms for the offshore oil and gas industry; — construction of bridge supports and foundations in rivers, estuaries, harbours and quays (and close proximity to them); — mooring and positioning of aquatic renewable energy devices. In the scientific literature, a number of attempts to measure the water-borne noise levels have been reported[1]-[13]. Often, these are difficult to compare because different ac

Scope: This document describes the methodologies, procedures, and measurement systems to be used for the measurement of the radiated underwater acoustic sound generated during pile driving using percussive blows with a hammer. A major motivation for undertaking measurements of the sound radiated during percussive pile driving is as part of an assessment of impact on aquatic fauna required by regulatory frameworks. This document describes a generic approach to measurements that can be applied to different regulatory requirements. This document is suitable for measurement of percussive pile driving undertaken for offshore installation of foundations (monopiles, jackets, tripods, etc.) used in construction of offshore wind farms, oil and gas platforms, and other inshore structures such as bridge foundations and aquatic renewable energy devices. This document does not cover measurement of the sound radiated by vibro- piling or sheet piling. This document does not cover piling in water of depth less than 4 m or greater than 100 m. The procedures described herein provide guidance on making measurements to satisfy the following objectives: — to monitor source output during piling, for example, for regulatory purposes; — to provide consistency in comparison of piling noise from different construction projects; — for validation of modelling or predictions. This document covers only the measurement of the sound field radiated during percussive pile driving. The scope of this document does not include the assessment of exposure metrics, or the use of exposure criteria. No attempt is made to prescribe a methodology for generating maps of the acoustic field in the vicinity of the source. In the normative part of this document, requirements and procedures are described for measurement of the sound field at specific ranges from the pile being driven. In this part of the document, no procedure is provided for determination of an acoustic output metric that is independent of the propagation path between source and receiver (such as a source level). Ideally, such a metric would have some predictive utility (for example, in calculating noise impact zones and noise maps). However, some in

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18406-2017 PDF

ISO 18406-2017 PDF

$113.50 $227.00