Stationary source emissions - Determination of the biogenic fraction in CO2 in stack gas using the balance method
Introduction: During the combustion of solid fuels, O2 is consumed and CO2 is simultaneously produced. Biogenic and fossil organic matter do not only show strong differences regarding O2 consumption and CO2 production, but also differences in their respective calorific value and carbon content are observable. The balance method can be used when the elementary composition of moisture and ash free biomass and fossil matter present in the fuel used is known and online stack gas composition measurements (O2 and CO2) are available at high accuracy. It will enable online modelling of biomass fossil ratio’s in stack gas giving the user the opportunity to control or report that ratio. The generated model data can be verified using the radiocarbon (14C) determined biomass fuel ratio. The results obtained using this document will be complementary to the results obtained with ISO 13833. In ISO 13833, the biogenic fraction in stack gas from plants with unknown fuel composition is determined using the 14C method. If the chemical composition of pure biogenic and fossil matter (contents of C, H, N, S, O referred of moisture and ash free biomass and fossil organic matter, respectively) present in the fuel used is known, the biogenic CO2 fraction can be calculated utilizing different operating data of the Waste for Energy (WfE) plant. When the chlorine content is sufficiently high, it can be additionally used to optimize the mass balances. © ISO 2016 – All rights reserved
Scope: This document enables the determination of the biogenic fraction in CO2 in stack gas using the balance method. The balance method uses a mathematical model that is based on different operating data of the Waste for Energy (WfE) plant (including stack gas composition) and information about the elementary composition of biogenic and fossil matter present in the fuel used. NOTE Use only mixed fuels when using the calculation method.