ISO 18623-1-2026 PDF

ISO 18623-1-2026 PDF

Air compressors and compressed air systems-Safety-Part 1: Air compressors

$113.50 $227.00 -50%
Product Code: ISO 18623-1 (2026)
Stock In Stock
Edition: 1.
Published: 07/2026
Number of Pages: 40
File Size: 1 file, 1.5 MB

Available Options

Product Description

Air compressors and compressed air systems — Safety — Part 1: Air compressors

Introduction: This document is a type-C standard as stated in ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organisations, market surveillance, etc.) Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (e.g. small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. © ISO 2026 – All rights reserved

Scope: This document is applicable to compressors, partially completed compressor units and compressor units having an operating pressure greater than 50 kPa and designed to compress air, nitrogen or inert gases. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of compressors and compressor units when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document includes under the general term compressor units those machines which comprise — the compressor, — a drive system, and — any component or device which is necessary for operation. This document covers compressors driven by any power media, including battery powered and which are fitted in or used with motor vehicles. The significant hazards dealt with in this document are identified in Annex A. This document does not cover requirements for compressors and compressor units used in potentially explosive atmospheres. This document is not applicable to compressors and compressor units which are manufactured before the date of publication of this document. This document does not cover compressors and compressor units for processing petroleum, petrochemicals, or chemicals within the scope of ISO/TC 67. This document does not give performance levels or safety integrity levels for safety related parts of control systems.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18623-1-2026 PDF

ISO 18623-1-2026 PDF

$113.50 $227.00