PPE ensembles for firefighters undertaking specific rescue activities - Part 4: Gloves
Introduction: ISO 18639 is a series of standards for personal protective equipment (PPE) for firefighters when engaged in specific rescue activities. It is not possible to provide a standard for PPE to cover all of the diverse range of rescue scenarios that firefighters are likely to encounter so it is important that risk assessments be undertaken to determine if the PPE covered by the ISO 18639 series is suitable for its intended use and the expected exposure to hazards. For complete protection against exposures, the risk assessment should allow protection of the whole body including the torso, arms and legs, head, face, hands and feet. For certain rescue activities, safety ropes and harnesses can be required. For certain rescue situations, special PPE for use in and on water can be required. In some cases, appropriate respiratory protection can also be identified as being necessary. The performance requirements specified in this document take account of accidental exposure to heat and flame, but do not cover PPE for firefighting. While this document takes account of accidental exposure to some common chemicals, it is not intended that PPE conforming to this document should be considered as providing chemical protection as a primary function. It does not cover PPE to protect against biological, electrical or radiation hazards. The risk assessment should determine whether PPE complying with this document or to the requirements of any other relevant standard is more suitable. Firefighters s
Scope: This document provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for protective gloves for firefighters while engaged in specific rescue activities. Gloves related to specific specialist rescue activities, such as road traffic crash (RTC) and urban search and rescue (USAR), are documented in individual subclauses of this document. NOTE Further guidance can be found in ISO 18639-1. The purpose of this document is to ensure that minimum performance requirements for incident type and/or hazard specific protective gloves are designated. This document deals with “rescue from emergencies involving modes of transportation” in particular performance requirements for personal protective equipment (PPE) intended to be used by firefighters, primarily but not solely to protect against hazard exposure at non fire rescue activities involving road traffic crash (RTC) or motor vehicle accidents (MVA). This document covers general glove design, the minimum performance level of the materials used and the methods of test for determining this performance level. This document does not cover special gloves for use in other high risk situations such as firefighting. This document does not cover protection for the head, torso, arms, legs and feet. These are covered in other parts of the ISO 18639 series. It does not cover protection of the hands against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to fire ground chemicals and blood or body fluids. Selection of the appropriate system of personal protective equipment (PPE), including gloves, is dependent on carrying out an effective risk assessment which identifies the hazard to be faced, evaluates the likelihood of those hazards and provides the means of reducing or eliminating these hazards.