ISO 18675-2022 PDF

ISO 18675-2022 PDF

Dentistry-Machinable ceramic blanks

$96.50 $193.00 -50%
Product Code: ISO 18675
Stock In Stock
Edition: 1ST
Published: 05/2022
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Dentistry — Machinable ceramic blanks

Introduction: A variety of ceramic blank materials are being used in machining systems for fabrication of various restorations. Although all these materials can have different chemical and microstructural makeup, there are some unique and common concerns for machining and performance of these materials. Machining damage, minimum machined thickness, and machining tolerances all are common concerns for these materials. The overwhelming use of zirconia and alumina is in the form of green or partially sintered blanks with shrinkage values of 20 % to 35 % by volume when sintered to full density. In order for the restoration to be fabricated with proper accuracy, the blank density should be carefully measured and conveyed to the computer controlled milling unit. This allows for proper oversizing and shrinkage to provide an accurate fit. Furthermore, the blank should be homogeneous throughout the body, otherwise differential shrinkage occurs resulting in significant warping and departure from linearity. With respect to glass ceramics, a subset requires crystallization post-machining during which distortion can occur placing the machined part out of the tolerance specified for the restoration. Also, another subset is machined in the crystallized state that can cause significant machining damage affecting the properties of the material. The machining process can cause surface and subsurface damage that can decrease the flexural strength of the material. Furthermore, damage can limit the minimum thi

Scope: This document specifies test methods for machinable ceramic blanks used for the fabrication of dental fixed restorations. This document also specifies the contents of the test report.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18675-2022 PDF

ISO 18675-2022 PDF

$96.50 $193.00