ISO 18758-2026 PDF

ISO 18758-2026 PDF

Mining and earth-moving machinery-Rock drill rigs and rock reinforcement rigs-Safety requirements

$145.50 $291.00 -50%
Product Code: ISO 18758
Stock In Stock
Edition: 1.
Published: 11/2026
Number of Pages: 86
File Size: 1 file, 3.4 MB

Available Options

Product Description

Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Safety requirements

Introduction: This document is a type C standard as stated in ISO 12100:2010. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers; — mining companies; — health and safety bodies (regulators, accident prevention organisations, market surveillance, etc.). Others that can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups are: — machine operators; — service providers, e.g. for maintenance; — third party system and technology providers. The above-mentioned stakeholder groups have been given the possibility to participate in the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document. The vocabulary of ISO 22932-5 is essential for the understanding of the safety requirements of this document. When requirements of this type C standard are different from those which are stated in type A or B standards, the requirements of this type C standard take precedence over the requirements of the other standards, for rock drill rigs and rock reinforcement rigs that have been designed and built in accordance with the requirements of this type C standard. The following assumptions were made in writing this document: a) the operators of the machines are well trained professionals and aw

Scope: This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations: a) blast hole drilling; b) rock reinforcement and consolidation (injection holes, pipe roofing, netting, bolting); c) drilling for secondary breaking; d) dimensional stone drilling; e) mineral prospecting, e.g. utilizing core drilling or reverse circulation drilling; f) water and methane drainage drilling; g) raise boring; when used by a well-trained operator in accordance with the information for use and where sufficient measures have been taken to prevent unauthorized entry of persons to the area where machines are working. NOTE Machines can be designed for more than one of the operations above. See ISO 22932-4 and ISO 22932-5 for vocabulary. This document is not applicable to the following machines: drill rigs for soil and rock mixture, Kelly drill rigs and casing drivers, cable tool drill rigs, pre-armouring machines, sonic drill rigs, shaft sinking drill rigs, crane attached drill rigs, drill rigs on derricks, scaling machines. This document deals with the relevant and significant hazards, hazardous situations, or hazardous events, as listed in Annex C, when the machine is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer. This document is not applicable to machines manufactured before the date of its publication.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18758-2026 PDF

ISO 18758-2026 PDF

$145.50 $291.00