ISO 18785-4-2018 PDF

ISO 18785-4-2018 PDF

Friction stir spot welding - Aluminium - Part 4: Specification and qualification of welding procedures

$48.00 $96.00 -50%
Product Code: ISO 18785-4
Stock In Stock
Edition: 1ST
Published: 11/2018
Number of Pages: 20
File Size: 1 file, 2 Bytes

Available Options

Product Description

Friction stir spot welding - Aluminium - Part 4: Specification and qualification of welding procedures

Introduction: Welding processes are widely used in the fabrication of engineered structures. During the second half of the twentieth century, fusion welding processes, wherein fusion is obtained by the melting of parent material and usually a filler metal, dominated the welding of large structures. In 1991, friction stir welding (FSW), which is carried out entirely in the solid phase (no melting), was invented. Friction stir spot welding (FSSW) processes are spot-like variants of the FSW process. Unlike FSW, there is minimal or no traverse motion of the tool. In basic FSSW, the joint is created by plunging a rotating tool into the work piece and retracting the tool out of the overlapping sheets. Other FSSW variants include additional tool movements. Frictional heat is generated from the contact between the tool and the material to be welded resulting in softening of this material. The softened material is stirred to form a metallurgical connection which is aided by the forge action applied by the tool shoulder contacting the upper sheet surface. The increasing use of FSSW has created the need for a FSSW standard in order to ensure that welding is carried out in the most effective way and that appropriate control is exercised over all aspects of the operation. The ISO 18785 series focuses on the FSSW of aluminium because, at the time this document was developed, the majority of commercial applications for FSW involved aluminium. Examples include railway cars, consumer products, food process

Scope: This document specifies the requirements for the content of welding procedure specifications for the Friction Stir Spot welding (FSSW) of aluminium. In this document, the term "aluminium" refers to aluminium and its alloys

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18785-4-2018 PDF

ISO 18785-4-2018 PDF

$48.00 $96.00