ISO 18830-2016 PDF

ISO 18830-2016 PDF

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface - Method by measuring the oxygen demand in closed respirometer

$48.00 $96.00 -50%
Product Code: ISO 18830
Stock In Stock
Edition: 1ST
Published: 08/15/2016
Number of Pages: 16
File Size: 1 file, 399 Bytes

Available Options

Product Description

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface - Method by measuring the oxygen demand in closed respirometer

Introduction: Products made with biodegradable plastics are designed to be recovered by means of organic recycling in composting plants or in anaerobic digesters. The uncontrolled dispersion of biodegradable plastics in natural environments is not desirable. The biodegradability of products cannot be considered as an excuse to spread wastes that should be recovered and recycled. However, test methods to measure rate and level of biodegradation in natural environments (such as soil or the marine environment) are of interest in order to better characterize the behaviour of plastics in these very particular environments. As a matter of fact, some plastics are used in products that are applied in the sea (e.g. fishing gear) and sometimes they can get lost or put willingly in marine environment. The characterization of biodegradable plastic materials can be enlarged by applying specific test methods that enable the quantitative assessment of biodegradation of plastics exposed to marine sediment and seawater. Plastic products are directly littered or arrive with fresh waters in the pelagic zone (free water). From there, and depending on density, tides, currents, and marine foiling may sink to the sublittoral, and reach the seafloor surface. Many biodegradable plastics have a density higher than 1 and therefore tend to sink. The sediment passes from aerobic to anoxic and finally anaerobic conditions going from the surface (the interface with seawater) into deeper layers, displaying a very steep o

Scope: This International Standard specifies a test method to determine the degree and rate of aerobic biodegradation of plastic materials when settled on marine sandy sediment at the interface between seawater and the seafloor, by measuring the oxygen demand in a closed respirometer. Measurement of aerobic biodegradation can also be obtained by monitoring the carbon dioxide evolution. This is not in the scope of this International Standard but of ISO 19679. This test method is a simulation under laboratory conditions of the habitat found in different seawater/sediment-areas in the sea, e.g. in a benthic zone where sunlight reaches the ocean floor (photic zone) that, in marine science, is called sublittoral zone The determination of biodegradation of plastic materials buried in marine sediment is outside the scope of this International Standard. The conditions described in this International Standard may not always correspond to the optimum conditions for the maximum degree of biodegradation to occur.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18830-2016 PDF

ISO 18830-2016 PDF

$48.00 $96.00