ISO 18941-2020 PDF

ISO 18941-2020 PDF

Imaging materials-Colour reflection prints-Test method for ozone gas fading stability

$96.50 $193.00 -50%
Product Code: ISO 18941
Stock In Stock
Edition: 3RD
Published: 07/2020
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Imaging materials — Colour reflection prints — Test method for ozone gas fading stability

Introduction: In image permanence testing, there are four environmental variables known to affect the stability of a photographic image: heat, light, moisture and air pollution, such as ozone[13][14][15][16][17][18][19][20][21] [22][23][24][25][26]. Although natural ageing under “real-world” environmental levels of these variables is considered the only certain test for image permanence, the high stability of most modern photographic products makes testing under ambient conditions too lengthy a process to be of practical use. Thus, a widely used alternative to natural ageing is accelerated ageing, whereby a sample specimen is exposed to each environmental variable individually and at levels considerably greater than ambient, forcing degradation of the image by that single factor in a far shorter length of time. This document covers the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within a photographic image due to that exposure. It is important to note that if predictions of absolute product longevity are of concern to the experimenter, then further knowledge shall be gained regarding the reciprocal behaviour of the test product under the experimental accelerated ozone conditions. See Annex A for more information on reciprocity. Additionally, there are other known variables in an ozone test setup that can affect the rate at which an image will degrade in the presence of ozone. Thes

Scope: This document describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analogue photographic colour print images due to that exposure. The test method described in this document uses increased levels of ozone to achieve an accelerated test. If the principal “gas fading” mechanism for a system is not ozone, this method might not be suitable and might give misleading results as to resistance of the test image to polluted air.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18941-2020 PDF

ISO 18941-2020 PDF

$96.50 $193.00