Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety-related parts of the control system and performance requirements
Introduction: This document addresses systems of all energy types used for functional safety in earth-moving machinery. The structure of safety standards in the field of machinery is as follows. Type-A standards (basic standards) give basic concepts, principles for design and general aspects that can be applied to machinery. Type-B standards (generic safety standards) deal with one or more safety aspects, or one or more types of safeguards that can be used across a wide range of machinery. — Type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise). — Type-B2 standards on safeguards (e.g. two-hands controls, interlocking devices, pressure sensitive devices, guards). Type-C standards (machinery safety standards) deal with detailed safety requirements for a particular machine or group of machines. This document is a type-C standard as stated in ISO 12100:2010. This document is of relevance, in particular, for the following stakeholder groups representing market players with regard to machinery safety: — machine and component manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organizations, market surveillance etc.). Others can be affected by the level of machinery safety achieved in accordance with this document: — machine users and employers (small, medium and large enterprises); — machine users and employees (e.g. trade unions, organizations for people with special needs); — service provi
Scope: This document specifies a methodology for the determination of performance levels required for earth- moving machinery as defined in ISO 6165:2022 NOTE 1 For controls determined to be safety-related, the characteristics for architecture, hardware, software, environmental requirements, and performance are covered by other parts in the ISO 19014 series. NOTE 2 The ISO 19014 series covers the significant hazards caused by the failure of a safety control system and excludes hazards arising from the equipment itself (for example, electric shock or fire). To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-2:2026, ISO 19014-3:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not apply to other controls that are not safety control systems (SCS) and that do not mitigate a hazard or perform a control function, and where the operator would be aware of a failure (e.g. windscreen wipers, head lights, cab light). NOTE 3 A list of safety control systems is included in Annex B. NOTE 4 Audible warnings are excluded from the requirements of diagnostic coverage. This document is not applicable to earth-moving machinery manufactured before the date of its publication.