Earth-moving machinery — Functional safety — Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system
Introduction: This document addresses systems of all energy types used for functional safety in earth-moving machinery. The structure of safety standards in the field of machinery is as follows: Type-A standards (basic standards) give basic concepts, principles for design and general aspects that can be applied to machinery. Type-B standards (generic safety standards) deal with one or more safety aspects, or one or more types of safeguards that can be used across a wide range of machinery. — Type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise). — Type-B2 standards on safeguards (e.g. two-hands controls, interlocking devices, pressure sensitive devices, guards). Type-C standards (machinery safety standards) deal with detailed safety requirements for a particular machine or group of machines. This document is a type-C standard as stated in ISO 12100:2010. This document is of relevance, in particular, for the following stakeholder groups representing market players with regard to machinery safety: — machine and component manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organizations, market surveillance etc.). Others can be affected by the level of machinery safety achieved in accordance with this document: — machine users and employers (small, medium and large enterprises); — machine users and employees (e.g. trade unions, organizations for people with special needs); — service provi
Scope: This document specifies general principles for the development and evaluation of the machine performance level achieved (MPLa) of safety-control systems (SCS) using components powered by all energy sources (e.g. electrical, hydraulic, mechanical) used in earth-moving machinery and its equipment, as defined in ISO 6165:2022. The principles of this document apply to machine control systems (MCS) that control machine motion or mitigate a hazard; such systems are assessed for machine performance level required (MPLr) per ISO 19014-1:20261) or ISO 19014-5:2026.2) NOTE 1 Requirements for the application of functional safety throughout the software development lifecycle are addressed in ISO 19014-4:2026.3) To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-3:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not apply to the following systems: — awareness systems that do not impact machine motion (e.g. cameras and radar detectors); — fire suppression systems, unless the activation of the system interferes with, or activates, another SCS. This document does not apply to other systems or components where the operator would be aware of failure (e.g. windscreen wipers, head lights), or are primarily used to protect property. NOTE 2 Audible warnings are excluded from the requirements of diagnostic coverage. This document addresses the significant hazards, as defined in ISO 12100:2010, mitigated by the hardware components within the SCS. This document is not applicable to earth-moving machinery manufactured before the date of its publication.