Intelligent transport systems - Communications access for land mobiles (CALM) - CoAP facility
Introduction: The set of International Standards that collectively refer to communications access for land mobile (CALM) focus on the specification of open interfaces regarding the functionality required by all relevant layers and entities of a Standard ITS station reference architecture. These International Standards are designed to allow interoperable instantiations of ITS stations, which are based on the concept of abstracting applications and services from the underlying communication layers. This abstraction makes the ITS station architecture described herein ideally suited to the development and deployment of Cooperative ITS applications and services. The set of CALM International Standards include specifications for security in ITS communications, ITS-S management, distributed ITS-S implementations, legacy communication media interfaces, legacy application interfaces and new communication interfaces specifically designed for ITS applications, such as those designed for safety of both life and property. The fundamental advantage of the CALM concept with respect to traditional systems is the ability to support vertical handovers between the various media that can be included in a CALM system. Handover mechanisms are defined within the CALM architecture International Standard (ISO 21217), the CALM medium service access points International Standard (ISO 21218) and the CALM communication and station management International Standard (ISO 24102). At network layer, CALM IPv6 networking IS
Scope: This document describes the CoAP facilities between two or more ITS stations communicating over the global internet communication network. It is assumed that the reader is familiar with IETF specifications found in request for comments (RFCs) of individual CoAP and 6LoWPAN protocol blocks used within this document. This document does not define a new protocol, a new exchange of messages at the CoAP layer, or new data structures. It defines how protocols standardized by IETF are combined so that ITS stations can communicate with one another using CoAP. Procedures defined to share information between the CoAP layer and other components of the ITS station architecture are defined in ISO 24102 series (Management). In addition to the requirements specified within this document, a number of notes and examples are provided to illustrate CoAP main facilities.