ISO 19097-1-2018 PDF

ISO 19097-1-2018 PDF

Accelerated life test method of mixed metal oxide anodes for cathodic protection - Part 1: Application in concrete

$71.50 $143.00 -50%
Product Code: ISO 19097-1
Stock In Stock
Edition: 1ST
Published: 02/2018
Number of Pages: 22
File Size: 1 file, 544 Bytes

Available Options

Product Description

Accelerated life test method of mixed metal oxide anodes for cathodic protection - Part 1: Application in concrete

Introduction: Impressed current cathodic protection (ICCP) is an effective method to control corrosion of metallic structures immersed in seawater, brackish water and fresh water or buried in soil. ICCP is also widely applied to prevent steel reinforcement in concrete from corrosion in marine or other chloride contaminated environment. Mixed metal oxide (MMO) anodes have been widely taken as impressed current anodes in the ICCP system due to their good electrocatalytic activity, low consumption rate, long service life, light weight, malleability, high ratio of performance to cost, and wide suitability for different electrolytes. Durability is one of the most important properties of MMO anodes. ISO 19097 (all parts) examines the accelerated life test method of MMO anodes for cathodic protection to evaluate the anode’s ability to achieve an expected lifetime. The accelerated lifetime can also be used to compare the stability of different MMO anodes. This document is applicable to MMO anodes intended for use in concrete. This method is not intended to give the exact service life of the anodes in the practical applications, but to provide users and manufacturers of MMO anodes a way to evaluate whether the designed life expectancy can be achieved. Large portions of this document were derived from NACE International Standard TM0294-2016[1]. © ISO 2018 – All rights reserved

Scope: This document specifies accelerated life test method of mixed metal oxide anodes for impressed current cathodic protection used in concrete. The accelerated life test results can be used to compare the durability of the anodes and to evaluate whether the anodes can comply with required specifications of design life expectancy at rated current output. This document is also applicable to other anode systems that are used as impressed current anodes embedded in concrete with suitably modified apparatus to hold anodes of different geometry.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19097-1-2018 PDF

ISO 19097-1-2018 PDF

$71.50 $143.00