Geographic information - Imagery sensor models for geopositioning Part 1: Fundamentals
Introduction: The purpose of this document is to specify the geolocation information that an imagery data provider shall supply in order for the user to be able to find the earth location of the data using a Physical Sensor Model (PSM), a True Replacement Model (TRM) or a Correspondence Model (CM). Detailed PSMs are defined for passive electro-optical visible/ IR sensors (frame, pushbroom and whiskbroom) and for an active microwave sensing system (SAR). A set of components from which models for other sensors can be constructed is also provided. Metadata required for geopositioning using a TRM, a CM, or ground control points (GCPs) are also specified. The intent is to standardize sensor descriptions and specify the minimum geolocation metadata requirements for data providers and geopositioning imagery systems. Vast amounts of data from imaging systems are collected, processed and distributed by government mapping and remote sensing agencies and commercial data vendors. In order for this data to be useful in extraction of geographic information, it requires further processing. Geopositioning, which determines the ground coordinates of an object from image coordinates, is a fundamental processing step. Because of the diversity of sensor types and the lack of a common sensor model standard, data from different producers can contain different parametric information, lack parameters required to describe the sensor that produces the data, or lack ancillary information necessary for geopositioning
Scope: This document identifies the information required to determine the relationship between the position of a remotely sensed pixel in image coordinates and its geoposition. It supports exploitation of remotely sensed images. It defines the metadata to be distributed with the image to enable user determination of geographic position from the observations. This document specifies several ways in which information in support of geopositioning can be provided. a) It may be provided as a sensor description with the associated physical and geometric information necessary to rigorously construct a PSM. For the case where precise geoposition information is needed, this document identifies the mathematical equations for rigorously constructing PSMs that relate 2D image space to 3D ground space and the calculation of the associated propagated errors. This document provides detailed information for three types of passive electro-optical/ IR sensors (frame, pushbroom and whiskbroom) and for an active microwave sensing system SAR. It provides a framework by which these sensor models can be extended to other sensor types. b) It can be provided as a TRM, using functions whose coefficients are based on a PSM so that they provide information for precise geopositioning, including the calculation of errors, as precisely as the PSM they replace. c) It can be provided as a CM that provides a functional fitting based on observed relationships between the geopositions of a set of GCPs and their image coordinates. d) It can be provided as a set of GCPs that can be used to develop a CM or to refine a PSM or TRM. This document does not specify either how users derive geoposition data or the format or content of the data the users generate.