Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 1: Requirements for passenger vehicle rear-end targets
Introduction: ADAS (Advanced Driver Assistance Systems) and Active Safety systems are designed to support decision-making for the driver, extend the driver’s awareness of the traffic situation with advanced warnings, improve the behaviour of the vehicle, and even take over vehicle control in an emergency situation. The goal is to completely avoid an accident or at least reduce the severity of an accident. Testing of active safety systems requires documentation of test materials, test environment, testing procedures, and performance criteria. This document series addresses the specification of test target objects for traffic scenarios representing vehicles, vulnerable road users and other objects in the forward path of the subject vehicle. This document addresses the specification of vehicle rear-end test targets (see Annex E for examples of existing vehicle rear-end targets). A future part of this document series is intended to address also other configurations (3D targets). A surrogate vehicle target needs to represent a real vehicle in terms of detectability and movement. It should also provide safety for the subject vehicle and test operators in the event that contact is made between the subject vehicle and the target. Crashworthiness and durability requirements for the vehicle target require that the material and construction of the vehicle target are adapted to fit the purposes. Test cases usually address both stationary and moving vehicle targets and, as such, the physical constructi
Scope: This document specifies performance requirements for surrogate targets used to assess the system detection and activation performance of active safety systems. This document specifies the properties of a vehicle target that will allow it to represent a passenger vehicle in terms of size, shape, reflection properties, etc. for testing purposes. The document addresses the detection requirements for a vehicle target in terms of sensing technologies commonly in use at the time of publication of this document, and where possible, anticipated future sensing technologies. It also addresses methodologies to verify the target response properties to these sensors, as well as performance requirements for the target carrier. This document specifies the properties of the vehicle target for simulation of rear-end scenarios, with overlap greater than 50 %. The specifications of vehicle targets in this document are intended to address current and anticipated test protocols related to safety critical events in which the subject vehicle approaches a stopped, braking or slower moving (target) vehicle from behind and in the forward path of the subject vehicle. This document does not address the test procedures in terms of speeds, positions, or timing of events. Performance criteria for the active safety system are also not addressed.