Road vehicles - Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions - Part 2: Requirements for pedestrian targets
Introduction: ADAS (Advanced Driver Assistance Systems) and Active Safety systems are designed to support decision-making for the driver, extend the driver’s awareness of the traffic situation with advanced warnings, improve the behaviour of the vehicle, and even take over vehicle control in an emergency situation. The goal is to completely avoid an accident or at least reduce the severity of an accident. Testing of active safety systems requires documentation of test materials, test environment, testing procedures, and performance criteria. This document series addresses the specification of test target objects for traffic scenarios representing vehicles, vulnerable road users and other objects in the forward path of the subject vehicle. This document addresses the specification of pedestrian test targets. A pedestrian test target needs to resemble the characteristics of a human, yet provide safety for the subject vehicle and test operators in the event that contact is made between the subject vehicle and the pedestrian target. Crashworthiness and durability requirements for the pedestrian target require that the material and construction of the pedestrian target are adapted to fit the purposes. Pedestrian test targets may need to represent a range of pedestrian sizes to evaluate the performance of an active safety system. Test cases may address both stationary and moving targets and, as such, the physical construction of the target may accommodate a target carrier system capable of mimic
Scope: This document specifies performance requirements for surrogate targets used to assess the system detection and activation performance of active safety systems. This document specifies the properties of pedestrian targets that represent an adult or a child in terms of size, shape, reflection properties, etc. for testing purposes. The document addresses the detection requirements for a pedestrian target in terms of sensing technologies commonly in use at the time of publication of this document, and where possible, anticipated future sensing technologies. It also addresses methodologies to verify the target response properties to these sensors, as well as some performance requirements for the target carrier. This document does not address the test procedures in terms of speeds, positions, or timing of events. Performance criteria for the active safety system being evaluated are also not addressed. A related test procedure using pedestrian targets according to this document can be found in ISO 19237.