Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 3: Requirements for passenger vehicle 3D targets
Introduction: ADAS (advanced driver assistance systems) and active safety systems are designed to support decision- making for the driver, extend the driver’s awareness of the traffic situation with advanced warnings, improve the behaviour of the vehicle, and even take over vehicle control in an emergency situation. The goal is to completely avoid an accident or at least reduce the severity of an accident. The surrogate target is an essential component in the evaluation of ADAS/active safety functions and different levels of automated driving systems, in all situations where a collision with the target may occur. The characteristics of targets must be trustworthy and a vehicle target must be recognized as a real vehicle by the various sensing technologies. This document addresses the specification of vehicle 3D test targets. It is important that a surrogate vehicle target represents a real vehicle in terms of detectability and movement from all directions. It should also provide safety for the subject vehicle and test operators if contact is made between the subject vehicle and the target. Crashworthiness and durability requirements for the vehicle target require that the material and construction of the vehicle target are adapted to fit the purposes. Test cases usually address both stationary and moving targets and, as such, the physical construction of the target accommodates a target carrier system capable of mimicking realistic motions. This document includes requirements on the target
Scope: This document specifies performance requirements for surrogate targets used to assess the system detection and performance of active safety systems. This document specifies the properties of an omni-directional multi-purpose vehicle target for assessment of interaction in a variety of traffic scenarios. This document specifies the properties of a vehicle target that will allow it to represent a passenger vehicle in terms of size, shape, reflection properties, etc. for testing purposes. This document addresses the detection requirements for a vehicle target in terms of sensing technologies commonly in use at the time of publication of this document, and where possible, anticipates future sensing technologies. It also addresses methodologies to verify the target response properties to these sensors, as well as performance requirements for the target carrier. The vehicle targets specified in this document reflect passenger cars and, in particular, the smaller and more common B and C segment cars. This document does not address the test procedures in terms of speeds, positions, or timing of events. Performance criteria for the active safety system are also not addressed.