ISO 19234-2024 PDF

ISO 19234-2024 PDF

Hydrometry-Low cost baffles to aid fish passage on triangular profile gauging weirs

$96.50 $193.00 -50%
Product Code: ISO 19234
Stock In Stock
Edition: 1.
Published: 03/2024
Number of Pages: 30
File Size: 1 file, 3 Bytes

Available Options

Product Description

Hydrometry — Low cost baffles to aid fish passage on triangular profile gauging weirs

Introduction: Flow gauging structures such as triangular profile weirs are commonly used for the measurement of open channel flows. This document applies to weirs operating under modular flow conditions, with flow passing through critical depth. To operate under these conditions, such weirs require a sufficient head difference to be generated between upstream and downstream. At structures operating in the modular flow range, flow rate is solely a function of the upstream head. In recent years, greater emphasis has been placed on environmental issues, including the free migration of fish in watercourses. It is acknowledged that the head drop required to achieve modular flow can inhibit the movement of fish. It has become important, therefore, to consider ways of aiding fish migration without significantly affecting flow measurement accuracy. Applied research has shown that baffles of suitable form and placement on the downstream face of triangular profile weirs can partially mitigate fish passage impacts while retaining the gauging function. NOTE The coefficient of discharge of the weir would normally remain the same although it is an option to recalibrate the coefficient to take into account the placement of baffles. The baffle system described in this document was adapted from an optimal solution for aiding fish passage[1] [2] on non-gauging sloping weirs commonly used for other purposes (e.g. abstraction, flow diversion, power generation, navigation). The following Excel1) spreadsheet to

Scope: This document specifies how to integrate baffles to aid the passage of fish on the downstream face of triangular profile weirs that conform to ISO 4360 (including Crump weirs) and ISO 4377 (flat-V weirs).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19234-2024 PDF

ISO 19234-2024 PDF

$96.50 $193.00