Intelligent transport systems — Pedestrian detection and collision mitigation systems (PDCMS) — Performance requirements and test procedures
Introduction: The fatality and severe injury rates of traffic accidents involving pedestrians are significantly high, resulting in the loss of many lives. Pedestrian detection and collision mitigation systems (PDCMS) reduce the severity of pedestrian collisions that cannot be avoided and can reduce the likelihood of fatality. By a collision warning (CW) and automatically activating emergency braking, PDCMS assist in slowing a vehicle when a collision is likely. Functional elements of a PDCMS are shown in Figure 1. Figure 1 — Functional elements of pedestrian detection and collision mitigation systems (PDCMS) A PDCMS detects pedestrians ahead of time, determine if detected pedestrians represent a hazardous condition, and warn the driver if a hazard exists. A PDCMS estimates if the driver has an adequate opportunity to respond to the hazard. If there is inadequate time available for the driver to respond, and if appropriate criteria are met, a PDCMS determines that a collision is imminent. Based upon this assessment, a PDCMS will activate CWs and vehicle brakes to mitigate collision severity. This document, while not a collision avoidance standard, does not preclude a manufacturer from implementing collision avoidance with a PDCMS. System designers and other users can apply the provisions of this document to stand-alone PDCMS or to the integration of the PDCMS functions into other driving assistance and support systems. © ISO 2026 – All rights reserved
Scope: This document specifies the concepts of operation, minimum functionality, system requirements, system interfaces and test procedures for pedestrian detection and collision mitigation systems (PDCMS), which can reduce the likelihood of fatality and severity of injury. A PDCMS requires information about range to pedestrians, motion of pedestrians, motion of the subject vehicle (SV), driver commands and driver actions. It specifies the behaviours that are required for PDCMS, and the system test criteria necessary to verify that a given implementation meets the requirements of this document. Implementation choices are left to system designers wherever possible. Systems that include other countermeasures such as evasive steering are not within the scope of this document. Responsibility for the safe operation of the vehicle remains with the driver. This document applies to light duty passenger vehicles. It does not apply to other vehicle categories such as heavy vehicles or motorcycles. PDCMS are not intended for off-road use.