Rubber compounding ingredients - Silica - Oil absorption of precipitated silica
Introduction: Due to health and environmental safety precautions, the determination of DOA absorption number has been worked out to substitute the determination of the DBP absorption number. Dibutylphthalate (DBP) and dioctylphthalate (DOP) were commonly used in the past for determining the absorption capacity of pigments and extenders, like carbon black and silica. In the meantime, both substances have been banned as carcinogenic, mutagenic, reprotoxic substances (CMR) in different countries. The search of a suitable alternative for DBP and DOP, especially for measuring the absorption capacity of polar pigments and extenders, like silica, calcium silicates and sodium aluminium silicates has been carried out in a task group of the Association of Synthetic Amorphous Silica Producers (ASASP) between 2004-2008. Out of different tested liquids, like linseed oil, paraffinic oil, etc., DOA was found as the most suitable alternative which leads to evaluated absorption numbers close to DBP measurement. © ISO 2016 – All rights reserved
Scope: This International Standard specifies a general method for determining the liquid absorption capacity of a pigment and extender by using di-(2-ethylhexyl) adipate (DOA, CAS 103-23-1). The determination of the DOA absorption number is performed by means of an absorptometer which is equipped with a torque measurement and processing system. The DOA absorption number provides an indication of the void volume formed by the aggregates and agglomerates of the pigments and extenders.