ISO 19461-1-2018 PDF

ISO 19461-1-2018 PDF

Radiological protection - Measurement for the clearance of waste contaminated with radioisotopes for medical application - Part 1: Measurement of radioactivity

$71.50 $143.00 -50%
Product Code: ISO 19461-1
Stock In Stock
Edition: 1ST
Published: 07/2018
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Radiological protection - Measurement for the clearance of waste contaminated with radioisotopes for medical application - Part 1: Measurement of radioactivity

Introduction: This document addresses the method for radioactivity measurement, the procedure for determining the storage period, the condition for the clearance of waste contaminated with radioisotopes for medical application based on the initial condition of each type of waste, and the equation to obtain radioactivity from counting measurements using a detector. From the equation, the appropriate duration of storage for the radioactive waste before final disposal can be evaluated. The amounts of radioisotopes used in medical facilities that are disposed of as waste have been increasing rapidly, due to the development of various technologies applied to diagnosis and radiation treatment using nuclear medicine. Most of the nuclear medicine applications employ radioisotopes with a short half-life, such as 18F being used in positron emission tomography/computed tomography (PET/CT) diagnosis and 99mTc being used for a bone or thyroid scan. However, the quantities used in the medical facility can be so large that the disposal of the consequent radioactive waste becomes a serious concern. The International Atomic Energy Agency (IAEA) proposed criteria for the clearance level of radioactive waste depending on the individual dose (10 μSv/y) and collective dose (1 man-Sv/y) (IAEA Safety Series No 111-P-1.1)[10], and concentration of each nuclide (IAEA RS-G-1.7)[11], and methods for determining the clearance level from the criteria by evaluating the dose or concentration of the radioactive waste on

Scope: This document establishes a method for radioactivity measurement and determination of the storage periods of the radioactive wastes produced as a result of the medical application of radioisotopes based on counting measurements using a detector and decay correction of the initial activity concentration of the radioisotopes contained in the waste stream. It provides a set of controls and measurements for the self-clearance of the radioactive wastes by which the medical facility can be assured of meeting the clearance level. This document can also be used by testing laboratories or radioactive waste disposal operators. This document can also be useful for the guidance of the regulatory body. NOTE Due to the nature of the tests outlined, this document cannot be applied to pure beta emitting nuclides nor to alpha emitting nuclides with low energy gamma rays.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19461-1-2018 PDF

ISO 19461-1-2018 PDF

$71.50 $143.00