ISO 19638-2018 PDF

ISO 19638-2018 PDF

Intelligent transport systems - Road boundary departure prevention systems (RBDPS) - Performance requirements and test procedures

$96.50 $193.00 -50%
Product Code: ISO 19638
Stock In Stock
Edition: 1ST
Published: 09/2018
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

Intelligent transport systems - Road boundary departure prevention systems (RBDPS) - Performance requirements and test procedures

Introduction: Road boundary departure means a vehicle goes off the road unintentionally (not done intentionally by the driver). Such a departure can cause a crash by colliding with an oncoming vehicle, surrounding structures, or roll-over and the mortality rate in case of such accidents is high. To address this situation, systems which are effective in lane keeping assistance have been developed. Some representative systems are lane departure warning systems (LDWS) (presented in ISO 17361) and lane keeping assistance systems (LKAS) (presented in ISO 11270). LDWS informs the driver of danger by a warning in case of a departure but doesn’t have a function to control said departure. On the other hand, the main functionality of LKAS is to support driver operations to keep the vehicle within the lane while the vehicle is in the normal driving operation, not to avoid such accidents by actively preventing road departure. This document specifies road boundary departure prevention systems (RBDPS) which aim to prevent accidents caused by road departure. RBDPS is a driving safety support system aimed at both the prevention of road departure accidents by causes such as driver negligence and the mitigation of damages when accidents actually occur. RBDPS detects or predicts road departure and activates the actuator(s) to prevent such a departure. The actuator(s) controls yaw moment and deceleration of a vehicle such that the vehicle is effectively controlled so as to remain within the road boundaries. B

Scope: This document contains the basic control strategy, minimum functionality requirements, basic driver interface elements, minimum requirements for diagnostics and reaction to failure, and performance test procedures for road boundary departure prevention systems (RBDPS). RBDPS is a driving safety support system which acts on vehicles to prevent road departures. RBDPS is designed to reduce damage and accidents arising from road boundary departures. This document is intended to be applied to systems that predict road boundary departures and maintain the vehicle within the road boundaries by both lateral acceleration control and longitudinal deceleration control. RBDPS is intended to operate on roads (well-developed and standardized freeways or highways) having solid lane markers. Roadwork zones or roads without visible road boundary markers are not within the scope of this document. RBDPS is intended for light duty passenger vehicles and heavy vehicles. RBDPS is not designed to operate continuously, but to operate automatically only when possible road boundary departures are detected or predicted. However, the driver’s decision and operation takes priority at all times.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19638-2018 PDF

ISO 19638-2018 PDF

$96.50 $193.00