ISO 19870-1-2026 PDF

ISO 19870-1-2026 PDF

Hydrogen technologies-Methodology for determining the greenhouse gas emissions associated with the hydrogen supply chain-Part 1: Emissions associated with the production of hydrogen up to the production gate

$162.00 $324.00 -50%
Product Code: ISO 19870-1
Stock In Stock
Edition: 1.
Published: 04/2026
Number of Pages: 134
File Size: 1 file, 13 MB

Available Options

Product Description

Hydrogen technologies — Methodology for determining the greenhouse gas emissions associated with the hydrogen supply chain — Part 1: Emissions associated with the production of hydrogen up to the production gate

Introduction: The Paris Agreement was adopted at the UN Climate Change conference (COP21) with the aims of strengthening the global response to the threat of climate change, restricting global temperature rise to below 2 °C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1,5 °C above pre-industrial levels. To meet these goals, greenhouse gas (GHG) emissions need to be reduced by about 45 % from 2010 levels by 2030, reaching net zero in 2050 (IPCC, 2018; UNFCCC, 2021). Initiatives on GHG mitigation rely on the quantification, monitoring, reporting and verification of GHG emissions and/or removals. International Standards that support the transfer of scientific knowledge into tools can help in reaching the targets of the Paris Agreement to address climate change. ISO 14044 defines the requirements and guidelines identified in existing International Standards on life cycle assessment (LCA). The ISO 14060 series provides clarity and consistency for quantifying, monitoring, reporting and validating or verifying GHG emissions and removals to support sustainable development through a low-carbon economy. It also benefits organizations, project proponents and stakeholders worldwide by providing clarity and consistency on quantifying, monitoring, reporting and validating or verifying GHG emissions and removals. ISO 14067 is based on the requirements and guidelines on LCA identified in ISO 14044 and aims to set specific requirements for the quantification of a ca

Scope: There are numerous pathways to produce hydrogen. This document specifies a methodology for different hydrogen production pathways for determining the greenhouse gases (GHG) emissions associated with the hydrogen supply chain from the raw material extraction up to the production gate. This document considers the GHG emissions associated with hydrogen production up to the production gate. This document applies to and includes every step within the production process up to the production gate (see Figure 2 in the Introduction). NOTE Complementary documents in the ISO 19870 series will consider hydrogen conditioning, conversion and transport methods. ISO 14044 requires the goal and scope of a life cycle assessment (LCA) be clearly defined and be consistent with the intended application. Due to the iterative nature of LCAs, it is possible that the LCA scope needs to be refined during the study. According to ISO 14040:2006, A.2, the goals and scope of LCAs correspond to one of the following two approaches: a) an approach that assigns elementary flows and potential environmental impacts to a specific product system, typically as an account of the history of the product (see 4.1.2); b) an approach that studies the environmental consequences of possible (future) changes between alternative product systems (see 4.1.3). In this document, approach a) is referred to as an attributional approach, while approach b) is referred to as a consequential approach. Complementary information is accessible in the ILCD handbook[4]. A carbon footprint of a product (CFP) (3.1.2) or partial CFP (3.1.3) as defined by ISO 14067 can be estimated using either the attributional or the consequential approach, the latter corresponding to the use of “system expansion via substitution” to avoid allocation when a unit process yields multiple co-products. This document applies to the CFP for hydrogen production.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19870-1-2026 PDF

ISO 19870-1-2026 PDF

$162.00 $324.00