Additive manufacturing — Data — Data packages for AM parts
Introduction: Additive Manufacturing (AM) processes follow many of the same manufacturing steps observed in more “traditional” manufacturing processes, from design to manufacture to inspection. As an advanced manufacturing process, AM introduces additional complexities to those steps within an AM workflow (illustrated in Figure 1). AM-specific information is necessary to specify, verify, and archive data related to parts that are manufactured using AM technologies. Key information associated with those steps includes relevant facility, operator, machine, process, material, postprocess, inspection and other information (see ASTM F3490). Figure 1 — Illustrative additive manufacturing workflow[1] This document is developed on the premise that an overarching digital thread can represent the workflow of a part fabricated using an AM process, such as shown in Figure 1. This digital thread is comprised of the information requirements derived from various stages of fabrication, including design, manufacture, and inspection. By identifying and selecting specific information requirements from the digital thread (see Figure 2), a data package for a specific part can be developed for a specific application or scenario associated with each individual stage of the workflow. Data packages serve to provide an organization with a means to specify and organize part information requirements specific to a given application or scenario. Figure 2 — Illustrative information requirements associated with data pack
Scope: This document specifies the methods, parameter sets and models to develop and utilize a data package for a part created using AM technologies (AM part). This document is applicable to the information requirements associated with workflow of the fabrication of an AM part, from design to acceptance. Peripheral information related to entities such as organization, facility, operator, security, and others is addressed for sake of completeness; but is not the focus of this document and can be defined elsewhere. This document provides the means to develop an organizational or application-specific data package for the communication between and amongst the designer, the manufacturer, and all acceptance authorities, among other potential stakeholders. This document does not impose a plan of execution to produce an AM part, though a digital thread is provided to establish a referenceable information workflow. The requirements set forth in this document are based on the fabrication of a part using the PBF-LB/M (powder bed fusion-laser based/metal) process. While specific details directly relate to PBF-LB/M, generalized workflow requirements can be related to any AM process.