ISO/IEC 15067-5-2026 PDF

ISO/IEC 15067-5-2026 PDF

Information technology - Home Electronic System (HES) application model - Part 5: A safety framework and guidelines for control and data communication messages

$71.50 $143.00 -50%
Product Code: ISO/IEC 15067-5
Stock In Stock
Edition: 1.
Published: 03/2026
Number of Pages: 22
File Size: 1 file, 350 KB

Available Options

Product Description

Information technology - Home Electronic System (HES) application model - Part 5: A safety framework and guidelines for control and data communication messages

Introduction: Improving safety for consumers using appliances connected to a local area network in a home or building (called "networked appliances") depends on many factors: appliance design; appliance installation; appliance configuration; appliance provisioning of features; appliance user interface; appliance operation; appliance field upgrades; appliance maintenance; appliance repairs. A network in a home or apartment is also called a "home control system" (hcs). A home control system is any generic communications network used for home automation. The HES communications network specified by the HES series of standards (ISO/IEC 14543 series and related standards) is a subset of home control systems that conforms to the HES standards. Thus, all HESs are home control systems, but not all home control systems are HESs. A "networked appliance" (also called a "networked product") is any appliance that can respond to some home control system commands. The connection can be as simple as a power switch interposed between the mains and the power cord of a traditional appliance. This power switch receives on/off hcs signals to apply or cut power to the appliance. A "smart appliance" has a data connection to an hcs so it can respond to commands beyond on/off, such as queries and commands regarding operating modes, sensor readings, actuator states, energy consumption, etc. The smart appliance connection technology is not specified; it can be wired or wireless using the Internet Protocol (IP) or non

Scope: This document addresses the safety of persons and premises when using devices and appliances ("products") with interfaces to a communications network in a home or building ("premises"). Such products are called "networked appliances" and "networked products." This document specifies basic requirements for safer operation of products that can be controlled remotely via a connection to a communications network. The network can enable such products to form integrated applications. These products can interact via the premises network and can be controlled remotely from within the premises and from a wide area network outside connected to the premises network via a communications gateway. Recommendations and methods for remote-control message screening and guidelines for selecting messages to minimize risk are specified. These specifications can enhance safety in a home control system (hcs). The safety requirements specified in this document apply together with any relevant product safety standards. NOTE 1 ISO/IEC HES standards are identified by HES or "Home Electronic System" in the title. NOTE 2 This document addresses conditions of normal use and fault conditions throughout the lifetime of a product. Sabotage, force majeure, and intentional damage are not addressed in this document. NOTE 3 This document is not intended for safety-related equipment such a fire-detection and suppression system. NOTE 4 "Networked applications" and "networked products" describe the same category of devices and are used interchangeably in this document.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 15067-5-2026 PDF

ISO/IEC 15067-5-2026 PDF

$71.50 $143.00