Automatic identification and data capture techniques — Bar code symbol print quality test specification — Two-dimensional symbols
Introduction: The technology of bar coding is based on the recognition of patterns encoded, in bars and spaces or in a matrix of modules of defined dimensions, according to rules defining the translation of characters into such patterns, known as the symbology specification. Symbology specifications may be categorised into those for linear symbols, on the one hand, and two-dimensional symbols on the other; the latter may in turn be subdivided into “multi-row bar code symbols” sometimes referred to as “stacked bar code symbols”, and “two-dimensional matrix symbols”. In addition, there is a hybrid group of symbologies known as “composite symbologies”; these symbols consist of two components carrying a single message or related data, one of which is usually a linear symbol and the other a two-dimensional symbol positioned in a defined relationship with the linear symbol. Multi-row bar code symbols are constructed graphically as a series of rows of symbol characters, representing data and overhead components, placed in a defined vertical arrangement to form a (normally) rectangular symbol, which contains a single data message. Each symbol character has the characteristics of a linear bar code symbol character and each row has those of a linear bar code symbol; each row, therefore, may be read by linear symbol scanning techniques, but the data from all the rows in the symbol must be read before the message can be transferred to the application software. Two-dimensional matrix symbols are normal
Scope: This document — specifies two methodologies for the measurement of specific attributes of two-dimensional bar code symbols – one of which applies to multi-row bar code symbologies and the other to two-dimensional matrix symbologies; — specifies methods for evaluating and grading these measurements and deriving an overall assessment of symbol quality; — gives information on possible causes of deviation from optimum grades to assist users in taking appropriate corrective action. This document applies to two-dimensional symbologies for which a reference decode algorithm has been defined, however the methodologies in this document can be applied partially or wholly to other similar symbologies. NOTE While this document can be applied to direct part marks, better correlation between measurement results and scanning performance can be obtained with ISO/IEC 29158 in combination with this document.