ISO/IEC 18000-6-2025 PDF

ISO/IEC 18000-6-2025 PDF

Information technology-Radio frequency identification for item management-Part 6: General parameters for air interface communications at 860 MHz to 930 MHz

$48.00 $96.00 -50%
Product Code: ISO/IEC 18000-6
Stock In Stock
Edition: 4.
Published: 10/2025
Number of Pages: 16
File Size: 1 file, 1 Byte

Available Options

Product Description

Information technology — Radio frequency identification for item management — Part 6: General parameters for air interface communications at 860 MHz to 930 MHz

Introduction: This document describes a passive backscatter radio frequency identification (RFID) system that supports the following system capabilities: — identification and communication with multiple tags in the field; — selection of a subgroup of tags for identification or with which to communicate; — reading from and writing to or rewriting data many times to individual tags; — user-controlled permanently lockable memory; — data integrity protection; — interrogator-to-tag communications link with error detection; — tag-to-interrogator communications link with error detection; — support for both passive back-scatter tags with or without batteries. This document provides an overview for a passive-backscatter, RFID system operating in the 860 MHz to 930 MHz frequency range. The system comprises interrogators, also known as readers, and tags, also known as labels. The general overview describes four types called Type A, Type B, Type C and Type D. Details for each type are defined in the following documents and described in detail in the following paragraphs: — Type A: ISO/IEC 18000-61 — Type B: ISO/IEC 18000-62 — Type C: ISO/IEC 18000-63 — Type D: ISO/IEC 18000-64 This document, together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64, specifies the physical and logical requirements for a passive-backscatter, RFID system operating in the 860 MHz to 930 MHz frequency range. NOTE The titles of ISO/IEC 18000-61, ISO/IEC 18000-62 and ISO/IEC 18000-64 list an upp

Scope: This document specifies the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 930 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. This document is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. This document defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence and chip rate. It further defines the communications protocol used in the air interface. This document specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks- First (ITF) or tag-only-talks-after-listening (TOTAL) RFID system. This document, together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 specifies the following for the 860 MHz to 930 MHz range: — physical interactions (the signalling layer of the communication link) between interrogators and tags; — interrogator and tag operating procedures and commands; — the collision-arbitration scheme used to identify a specific tag in a multiple-tag environment.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 18000-6-2025 PDF

ISO/IEC 18000-6-2025 PDF

$48.00 $96.00