ISO/IEC 18000-7-2014 PDF

ISO/IEC 18000-7-2014 PDF

Information technology - Radio frequency identification for item management - Part 7: Parameters for active air interface communications at 433 MHz

$162.00 $324.00 -50%
Product Code: ISO/IEC 18000-7
Stock In Stock
Edition: 4TH
Published: 09/01/2014
Number of Pages: 210
File Size: 1 file, 5 Bytes

Available Options

Product Description

Information technology - Radio frequency identification for item management - Part 7: Parameters for active air interface communications at 433 MHz

Introduction: This part of ISO/IEC 18000 is intended to address radio frequency identification (RFID) devices operating in the 433 MHz frequency band, providing an air interface implementation for wireless, non- contact information system equipment for item management applications. Typical applications operate at ranges greater than one metre. The RFID system includes a host system and RFID equipment (interrogator and tags). The host system runs an application program, which controls interfaces with the RFID equipment. The RFID equipment is composed of two principal components: tags and interrogators. The tag is intended for attachment to an item, which a user wishes to manage. It is capable of storing a tag serial number and other data regarding the tag or item and of communicating this information to the interrogator. The interrogator is a device, which communicates to tags in its RF communication range. The interrogator controls the protocol, reads information from the tag, directs the tag to store data in some cases, and ensures message delivery and validity. This system uses an active tag. RFID systems defined by this part of ISO/IEC 18000 provide the following minimum features: — identify tag in range; — read data; — write data or handle read-only systems gracefully; — selection by group or address; — graceful handling of multiple tags in the field of view; — error detection. This part of ISO/IEC 18000 consists of two modes, Base and Extended. The following simplified differences sho

Scope: This part of ISO/IEC 18000 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO technical committees developing RFID application standards. This part of ISO/IEC 18000 is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. This part of ISO/IEC 18000 defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum power, spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. This part of ISO/IEC 18000 further defines the communications protocol used in the air interface. 2 Conformance The rules for evaluation of RFID device conformity to this part of ISO/IEC 18000 are defined in ISO/IEC TR 18047-7. 2.1 RF emissions general population Device manufacturers claiming conformance to this part of ISO/IEC 18000 shall declare on their own responsibility that RF emissions do not exceed the maximum permitted exposure limits recommended by either IEEE C95.1:2005 or ICNIRP according to IEC 62369-1. If a device manufacturer is unsure which recommendation is to be cited for compliance, the manufacturer shall declare on their own responsibility to ICNIRP limits. 2.2 RF emissions and susceptibility health care setting Device manufacturers claiming conformance to this part of ISO/IEC 18000 shall declare on their own responsibility that RF emissions and susceptibility comply with IEC 60601-1-2. 2.3 Command structure and extensibility This part of ISO/IEC 18000 includes a definition of the structure of command codes between an interrogator and a tag and indicates how many positions are available for future extensions. Command specification clauses provide a full definition of the command and its presentation. Eac

Contents:

  • Foreword
  • Introduction
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 18000-7-2014 PDF

ISO/IEC 18000-7-2014 PDF

$162.00 $324.00