Information Technology - BIOS Protection Guidelines
Introduction: Modern computers rely on fundamental system firmware, commonly known as the system Basic Input/Output System (BIOS), to facilitate the hardware initialization process and transition control to the operating system. The BIOS is typically developed by both original equipment manufacturers (OEMs) and independent BIOS vendors, and is distributed to end-users by motherboard or computer manufacturers. Manufacturers frequently update system firmware to fix bugs, patch vulnerabilities, and support new hardware. This International Standard provides security requirements and guidance for preventing the unauthorized modification of BIOS firmware on PC client systems. Unauthorized modification of BIOS firmware by malicious software constitutes a significant threat because of the BIOS’s unique and privileged position within the PC architecture. A malicious BIOS modification could be part of a sophisticated, targeted attack on an organization—either a permanent denial of service (if the BIOS is corrupted) or a persistent malware presence (if the BIOS is implanted with malware). The move from conventional BIOS implementations to implementations based on the Unified Extensible Firmware Interface (UEFI) may make it easier for malware to target the BIOS in a widespread fashion, as these BIOS implementations are based on a common specification. This International Standard focuses on current and future x86 and x64 desktop and laptop systems, although the controls and procedures could potentially
Scope: This International Standard provides requirements and guidelines for preventing the unauthorized modification of Basic Input/Output System (BIOS) firmware on PC client systems. Unauthorized modification of BIOS firmware by malicious software constitutes a significant threat because of the BIOS’s unique and privileged position within the PC architecture. A malicious BIOS modification could be part of a sophisticated, targeted attack on an organization —either a permanent denial of service (if the BIOS is corrupted) or a persistent malware presence (if the BIOS is implanted with malware). As used in this publication, the term BIOS refers to conventional BIOS, Extensible Firmware Interface (EFI) BIOS, and Unified Extensible Firmware Interface (UEFI) BIOS. This International Standard applies to system BIOS firmware (e.g., conventional BIOS or UEFI BIOS) stored in the system flash memory of computer systems, including portions that may be formatted as Option ROMs. However, it does not apply to Option ROMs, UEFI drivers, and firmware stored elsewhere in a computer system. Subclause 7.2 provides platform vendors with requirements for a secure BIOS update process. Additionally, subclause 7.3 provides guidelines for managing the BIOS in an operational environment. While this International Standard focuses on current and future x86 and x64 client platforms, the controls and procedures are independent of any particular system design. Conformance The following terms are used in this standard to indicate mandatory requirements, recommended options, or permissible actions. The terms “shall” and “shall not” indicate requirements to be followed strictly in order to conform to this standard and from which no deviation is permitted. The terms “should” and “should not” indicate that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility or course of action is discouraged but not prohibited. The terms “may” and “need not” indicate a course of action permissible within the limits of this standard.
Contents:
- Foreword
- Introduction
- Scope