Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments
Scope: This International Standard specifies the 25-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) or parallel automatic calling equipment (ACE). lt is applicable to voice band modems, public data net- work (PDN) facilities, telegraph Signal converters, and automatic calling equipment where CCITT l) Recommendations V.24 and V.28 are applicable. In the case of the PDN attachment through the X.20 interface, the functions of the interchange circuits are in accordance with CCITT Recommendation X.24. In the case of the V.20 type Outstation interface, the electrical characteristics are in accordance with CCITT Recommendation V.31 or V.31 bis. International Standard ISO/IEC 2110 additionally provides the dimensions of the connector housing, as well as the recom- mended means of providing a locking device (latching block) and connector shielding. Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this International Standard are encour- aged to investigate the possibility of applying the most recent editions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Stan- dards. ISO 261 : 1973, ISO general purpose metric screw threads - General plan. ISO 8480 : 1987, Information processing Data communi- ca tion - DTE/DCE interface back-up control Operation using the 25pole connector. CCITT Recommendation S.16 : 1989, Connection to the telex network of an automatic terminal using a V.24 [Il DCE/DTE in terface. CCITT Recommendation V. 19 : 1989, Modems for parallel data transmission using telephone signalling frequencies. CCITT Recommendation V.20 : 1989, Paralleldata transmission modems Standardlied for universal use in the general switched telephone network. CCITT Recommendation V.21 : 1989, 300 bits per second duplex modern Standardlied for use in the general switched telephone network