ISO/IEC 22592-1-2024 PDF

ISO/IEC 22592-1-2024 PDF

Office equipment-Print quality measurement methods for colour prints-Part 1: Image quality measurement methods

$96.50 $193.00 -50%
Product Code: ISO/IEC 22592-1
Stock In Stock
Edition: 1.
Published: 01/2024
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Office equipment — Print quality measurement methods for colour prints — Part 1: Image quality measurement methods

Introduction: There are several standard measurement methods to evaluate image quality attributes of printed images formed by office equipment, i.e. colour reproductions, line reproductions, image structures of sharpness and graininess, gloss properties. Included are ISO/IEC 19799, ISO/IEC 24790 and ISO/IEC 29112. ISO/IEC 24790 specifies the measurement methods for large area density uniformity of graininess, mottle and banding, as well as line qualities. ISO/IEC 29112 specifies the methods for measuring sharpness attributes of edge blurriness and raggedness, special frequency response, etc. ISO/IEC 19799 specifies the methods for gloss uniformity. By utilizing these documents, users can obtain consistent test results when they comply with the protocols specified in the documents. There are no standard methods to measure colour reproduction consistencies and geometrical accuracies in consecutive printing, and image stabilities in typical use case of print images formed by office equipment and used in office environments. In the current state, each printer distributer and its user can provide test results for those attributes measured by its own test methods and procedures, which are often convenient for its product, resulting in misleading customers in the selection of a printing system suitable for their use cases. The ISO/IEC 22592 series can provide standard methods and procedures for these print image attributes: ISO/IEC 22592-1 for colour consistency, ISO/IEC 22592-2 for geometrical a

Scope: This document specifies test methods as well as test charts to measure the image quality attributes and those variations in colour prints typically used in office environment. Included are digital colour prints formed by using a multifunction or single function printer. Printers supporting a maximum paper size of A4 or larger are suitable for the measurements using the test charts defined in this document. The image quality attributes included are colour reproduction, line quality, graininess and mottle. The sources of variation considered are locations in a page (within-page variation), printed side in a sheet (side-to-side variation), printed order of the sheet (sheet-to-sheet variation) and colours printed on the back side of evaluated patch (show-through variation). A duplex print set, comprising several sheets which are printed by multifunction or single function printer with colour images on both surfaces of a substrate, is a main application of the test methods to measure image quality variations in the set. Variations, such as within-page variation and sheet-to-sheet variation, are also applicable for a simplex print set comprising several sheets which are printed colour images on one surface of a substrate and no image on the other surface. Both duplex and simplex printers are applicable to form a print set. When image qualities of duplex prints are measured, duplex printers which are capable to print images on both sides of substrate automatically are applicable to form duplex prints. However, simplex printers which require a manual arrangement of substrates between the front side and back side printing to form duplex prints are out of scope of this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 22592-1-2024 PDF

ISO/IEC 22592-1-2024 PDF

$96.50 $193.00